STM3220G-EVAL STMicroelectronics, STM3220G-EVAL Datasheet - Page 17

• Manufacturer Part Number: STM3220G-EVAL
• Description: 16/32-BITS MICROS
• Manufacturer: STMicroelectronics
• Series: STM32r
• Type: MCUr

Specifications of STM3220G-EVAL

• Contents: Board
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: STM32 F2 Series

UM1069
4
Note:
1
2
Programming the demonstration
Normally, the STM3220G-EVAL demo is included with the board and the necessary
accessories described in
program the board himself by using the binary file included with the demo package (in the
\Binary folder).
Demonstration binary files are provided also for the legacy STM3220F-EVAL board Rev. A.
“_vx_y_z” in the file name refers to the version of the demonstration firmware.
You can program the demonstration using either the EWARM or the Bootloader method.
Using the EWARM (v6.10 and later) preconfigured project
1.
2.
3.
Using the Bootloader
Depending on the Bootloader serial interface you are using, you have to proceed as follows:
1.
2.
3.
For more information about the STM32F2xx Bootloader, please refer to AN2606, STM32
microcontroller system memory boot mode.
Open the EWARM\Flash_Loader.ewd workspace.
Open Project > Download > Download file, and select the *.out file to program
–
–
Once the binary is programmed, remove the JTAG probe and restart the board.
For USART or CAN interfaces:
a)
b)
For USB FS Device mode (DFU) interface, you have to use:
a)
b)
Once the binary is programmed, configure the boot pins to the “Boot from Flash”
position and restart the board.
Load the Binary\STM3220G-EVAL_FW_vx_y_z.out file for the STM3220G-EVAL
Rev. B
Load the Binary\STM3220F-EVAL_FW_vx_y_z.out file for the STM3220F-EVAL
Rev. A
Load the Binary\STM3220G-EVAL_FW_vx_y_z.bin file for the STM3220G-EVAL
Rev. B
Load the Binary\STM3220F-EVAL_FW_vx_y_z.bin file for the STM3220F-EVAL
Rev. A
Load the Binary\STM3220G-EVAL_FW_vx_y_z.dfu file for the STM3220G-EVAL
Rev. B
Load the Binary\STM3220F-EVAL_FW_vx_y_z.dfu file for the STM3220F-EVAL
Rev. A
Section 2.2.1: Required
Doc ID 018665 Rev 2
accessories, however the user can
Programming the demonstration
17/19