SI-3011ZD Allegro Microsystems Inc, SI-3011ZD Datasheet - Page 7

• Manufacturer Part Number: SI-3011ZD
• Description: Regulator IC - Low Dropout Voltage (Surface Mount)
• Manufacturer: Allegro Microsystems Inc

SI-3011ZD
High-Current,
Low-Dropout,
1.1~5 V Regulator
Tape and Reel Dimensions in Millimeters
Tape Specifications
1. Material: conductive polystyrene.
2. Allowable camber: 1 mm/100 mm maximum.
3. A0 (10.6 mm) and B0 (15.7 mm) measured on a plane
0.3 mm above the bottom of the pocket.
4. K0 (4.9 mm) is measured from a plane on the inside
bottom of the pocket to the surface of the carrier.
5. Ten pitches cumulative tolerance on tape ±0.2 mm.
6. The space between parts and cavity must not exceed
±0.3 mm from its normal position in any direction.
2
7
7. Surface resistivity of embossment: 10
ohm/cm
max.
8. K1 = 3.9 mm.
www.allegromicro.com
7