MCP9502PT-125E/OT Microchip Technology, MCP9502PT-125E/OT Datasheet - Page 8

• Manufacturer Part Number: MCP9502PT-125E/OT
• Description: Factory Programmed Temperature Switch, Active High, Push-pull Output 5 SOT-23 T
• Manufacturer: Microchip Technology

Specifications of MCP9502PT-125E/OT

• Leaded Process Compatible: Yes
• Rohs Compliant: Yes
• Sensing Accuracy Range: ± 2°C
• Temperature Sensing Range: -40°C To +125°C
• Supply Current: 25µA
• Supply Voltage Range: 2.7V To 5.5V
• Sensor Case Style: SOT-23
• No. Of Pins: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MCP9501/2/3/4
4.0
The
integrates a thermal diode, a comparator, and a factory
selectable
temperature
thresholds range from -35°C to 125°C at 10°C
increments. There is no additional configuration
required to operate this device. The selectable output
hysteresis is controlled using a single input pin. When
this pin is connected to ground, the output hysteresis is
2°C (typical) and when connected to V
hysteresis is 10°C (typical).
functional block diagram.
FIGURE 4-1:
There are two output configurations for this family, a
push-pull and an open-drain output with active-high
and active-low assertions. These assertion options are
referred to as Cold and Hot options, primarily due to the
direction of selected hysteresis. For the Cold option,
temperature has to fall below the threshold for the
output to assert High, and de-assert Low when the
temperature rises above the threshold plus the
hysteresis. For example, a 65°C threshold and 2°C
(typical) hysteresis, when temperature falls below 65°C
the output asserts High, and the de-asserts Low when
temperature rises above 67°C. For the Hot option, the
opposite is true. When temperature rises above 65°C,
the output asserts Low, and de-asserts High when the
temperature falls below 63°C.
graphical description for the Hot and Cold options.
DS22268A-page 8
Threshold
Select
MCP9501/2/3/4
FUNCTIONAL DESCRIPTION
resistive
thresholds.
I
SET
R
x
Functional Block Diagram.
network
temperature
+
Thermal
Diode
-
The
Figure 4-1
Figure 4-2
used
available
switch
DD
to
Hysteresis
Select Pin
OUT/
OUT
shows the
the output
shows a
set
output
family
the
FIGURE 4-2:
The Push-Pull output is ideal for a microcontroller
interface using an input/output pin or an interrupt input
pin. The open-drain option can be used with multiple
sensors in a wired-OR configuration or as a level
shifter.
V
V
Cold-Option (Active-High)
Cold
Hot-Option (Active-Low)
Cold
10°C Typical Hysteresis
T
HYST
Temperature
Temperature
10°C Typical Hysteresis
T
SET
Output Hysteresis.
© 2011 Microchip Technology Inc.
2°C Typical
T
Hysteresis
SET
Hysteresis
2°C Typical
T
Hot
Hot
HYST