TJA1028T/3V3/20 NXP Semiconductors, TJA1028T/3V3/20 Datasheet - Page 9

• Manufacturer Part Number: TJA1028T/3V3/20
• Manufacturer: NXP Semiconductors

Specifications of TJA1028T/3V3/20

• Number Of Transmitters: 1
• Power Supply Requirement: Single
• Package Type: SO
• Mounting: Surface Mount
• Pin Count: 8
• Dual Supply Voltage (typ): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Dual Supply Voltage (min): Not RequiredV
• Lead Free Status / RoHS Status: Compliant

NXP Semiconductors
8. Limiting values
Table 4.
In accordance with the Absolute Maximum Rating System (IEC 60134).
[1]
[2]
[3]
[4]
[5]
[6]
TJA1028
Product data sheet
Symbol
V
V
V
V
BAT
x
ESD
trt
Human Body Model (HBM): according to AEC-Q100-002 (100 pF, 1.5 kΩ).
V
ESD performance of pins LIN and V
Machine Model (MM): according to AEC-Q100-003 (200 pF, 0.75 μH, 10 Ω).
Charged Device Model (CDM): according to AEC-Q100-011 (field Induced charge; 4 pF).
Verified by an external test house to ensure pins can withstand ISO 7637 part 2 automotive transient test pulses 1, 2a, 3a and 3b.
CC
and V
Parameter
battery supply voltage
voltage on pin x
electrostatic discharge
voltage
transient voltage
Limiting values
BAT
7.5.3 Temperature protection
connected to GND, emulating application circuit.
The temperature of the IC is monitored in Normal, Standby and Off modes. If the
temperature is too high (T
or Normal modes). The voltage regulator and the LIN transmitter will be switched off and
the RSTN pin driven LOW.
When the temperature falls below the overtemperature protection release threshold
(T
vj
< T
th(rel)otp
BAT
according to IEC 61000-4-2 (150 pF, 330 Ω) has been verified by an external test house.
), the TJA1028 switches to Standby mode.
All information provided in this document is subject to legal disclaimers.
Conditions
DC; continuous
DC value
HBM
IEC 61000-4-2
MM
CDM
on pin V
on pin LIN via 1 nF coupling capacitor
pin V
pins TXD, RXD, RSTN and EN
pin LIN with respect to GND
at pins LIN and V
at any other pin
at pins LIN and V
at any pin
at corner pins
at any other pin
Rev. 2 — 25 February 2011
CC
BAT
vj
via reverse polarity diode/capacitor;
> T
th(act)otp
BAT
BAT
LIN transceiver with integrated voltage regulator
), the TJA1028 will switch to Off mode (if in Standby
[1]
[2]
[3]
[4]
[5]
[6]
Min
−0.3
−0.3
−0.3
−40
−8
−2
−8
−250
−750
−500
−150
TJA1028
© NXP B.V. 2011. All rights reserved.
Max
+40
+7
V
+40
+8
+2
+8
+250
+750
+500
+100
CC
+ 0.3
Unit
V
V
V
V
kV
kV
kV
V
V
V
V
9 of 24