PLRXPL-VC-S43-23-N JDS UNIPHASE, PLRXPL-VC-S43-23-N Datasheet - Page 16

• Manufacturer Part Number: PLRXPL-VC-S43-23-N
• Manufacturer: JDS UNIPHASE

Specifications of PLRXPL-VC-S43-23-N

• Number Of Receivers: 1
• Protocols Supported: IEEE 802.3
• Operating Supply Voltage (typ): 3.3V
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (max): 3.47V
• Operating Supply Voltage (min): 3.14V
• Pin Count: 20
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Lead Free Status / RoHS Status: Supplier Unconfirmed

16
Other information related to the SFP+ optical transceiver includes:
• Section 4.1
• Section 4.2
• Section 4.3
• Section 4.4
4.1
The PLRXPL-Vx-S43-23-N optical transceiver is equipped with a two-wire serial
EEPROM that is used to store specific information about the type and identi-
fication of the transceiver as well as real-time digitized information relating to
the transceiver’s performance. See the Small Form Factor Committee document
number SFF-8472 Revision 10.3, dated December 1, 2007 for memory/address
organization of the identification data and digital diagnostic data. The enhanced
digital diagnostics feature monitors five key transceiver parameters which are in-
ternally calibrated and should be read as absolute values and interpreted as fol-
lows:
Transceiver Temperature in degrees Celsius:
a 16-bit signed two’s complement value in increments of 1/256°C from -40 to
+70°C with LSB equal to 1/256°C. Accuracy is ± 3°C over the specified operating
temperature and voltage range.
Vcc/Supply Voltage in Volts:
integer with the voltage defined as the full 16-bit value(0 – 65535) with LSB equal
to 100 uV with a measurement range of 0 to +6.55 V. Accuracy is ± three percent
of nominal value over the specified operating temperature and voltage ranges.
TX Bias Current in mA:
fined as the full 16-bit value (0 – 65535) with LSB equal to 2 uA with a measure-
ment range of 0 – 131 mA. Accuracy is ± 10 percent of nominal value over the
specified operating temperature and voltage ranges.
TX Output Power in mW:
defined as the full 16-bit value (0 – 65535) with LSB equal to 0.1 uW. Accuracy is ±
2 dB over the specified temperature and voltage ranges over the range of -8.2 dBm
to 0.5 dBm. Data is not valid when transmitter is disabled.
RX Received Optical Power in mW:
signed integer with the power defined as the full 16-bit value (0-65535) with LSB
equal to 0.1 uW. Accuracy is ± 3 dB over the specified temperature and voltage
ranges over the power range of -12 dBm to 0.5 dBm.
Section 4
Digital Diagnostic Monitoring and Serial ID Operation
10 G SFP+ 850 NM LIMITING TRANSCEIVER,
10 GIGABIT ETHERNET COMPATIBLE
Digital diagnostic monitoring and serial ID operation
Package and handling instructions
ESD discharge (ESD)
Eye safety
Represented as a 16-bit unsigned integer with current de-
Represented as a 16-bit unsigned integer with the power
Related Information
Internally measured. Represented as a 16-bit unsigned
Represented as average power as a 16-bit un-
Internally measured. Represented as