USB2601-NU-02 Standard Microsystems (SMSC), USB2601-NU-02 Datasheet - Page 15

• Manufacturer Part Number: USB2601-NU-02
• Manufacturer: Standard Microsystems (SMSC)

Specifications of USB2601-NU-02

• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Package Type: TQFP
• Mounting: Surface Mount
• Pin Count: 128
• Lead Free Status / RoHS Status: Compliant

4th Generation USB 2.0 Flash Media Controller with Integrated Card Power FETs & HS Hub
Datasheet
SMSC USB2601/USB2602
Over Current Sense
CF Chip Select 1
CF Chip Select 0
Card Detection2
Card Detection1
Hardware Reset
CF Data [15:8]
CF Data [7:0]
CF Register
CF Register
CF Register
CF Interrupt
Green LED
Address 2
Address 1
Address 0
IO Ready
NAME
CF
CF
CF
CF_nRESET
OCS[4:2]_N
CF_D[15:8]
CF_IORDY
GR[4:2]_N
CF_D[7:0]
CF_nCD2
CF_nCD1
SYMBOL
CF_nCS1
CF_nCS0
CF_SA2
CF_SA1
CF_SA0
CF_IRQ
CompactFlash (In True IDE mode) INTERFACE
BUFFER
I/O8PD
I/O8PD
O8PU
O8PU
TYPE
I/O8
IPU
IPD
IPU
IPU
IPU
O8
O8
O8
O8
DATASHEET
15
Input from external current monitor indicating an over-
current condition. {Note: Contains internal pull-up to
3.3V supply}
Green indicator LED for ports 2, 3 and 4. Will be active
low when LED support is enabled via EEPROM or
SMBus.
This pin is the active low chip select 1 signal for the CF
ATA device
This pin is the active low chip select 0 signal for the task
file registers of CF ATA device in the True IDE mode.
This pin is the register select address bit 2 for the CF
ATA device.
This pin is the register select address bit 1 for the CF
ATA device
This pin is the register select address bit 0 for the CF
ATA device.
This is the active high interrupt request signal from the
CF device.
The bi-directional data signals CF_D15-CF_D8 in True
IDE mode data transfer.
In the True IDE Mode, all of task file register operation
occur on the CF_D[7:0], while the data transfer is on
CF_D[15:0].
The bi-directional data signal has an internal weak pull-
down resistor.
The bi-directional data signals CF_D7-CF_D0 in the
True IDE mode data transfer.
In the True IDE Mode, all of task file register operation
occur on the CF_D[7:0], while the data transfer is on
CF_D[15:0].
The bi-directional data signal has an internal weak pull-
down resistor.
This pin is active high input signal.
This pin has an internally controlled weak pull-up
resistor.
This card detection pin is connected to the ground on
the CF device, when the CF device is inserted.
This pin has an internally controlled weak pull-up
resistor.
This card detection pin is connected to ground on the
CF device, when the CF device is inserted.
This pin has an internally controlled weak pull-up
resistor.
This pin is an active low hardware reset signal to CF
device.
DESCRIPTION
Revision 1.6 (06-20-08)