MAX15 Aavid Thermalloy, MAX15 Datasheet - Page 34

• Manufacturer Part Number: MAX15
• Description: MAX CLIP
• Manufacturer: Aavid Thermalloy
• Series: Max Clip System™r

Specifications of MAX15

• Accessory Type: Clip(s)
• Product: Hardware & Accessories
• Designed For: D61
• For Use With/related Products: Max Clip System™
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 32614

34
www.aavidthermalloy.com
How to add solderable pins for easy attachment in circuit board applications
The Max Clip System™ can be mounted directly to printed circuit boards by installing tin plated pins in the base of the
heat sink and then creating a pattern of plated through holes in the circuit card to accept the pins. The heat sink assembly
can then be inserted into the circuit board holes and soldered into place during wave solder operations. These pins come
in a variety of stand-off lengths as illustrated below. Since placement of the pins is specific to the application, a customer
supplied drawing is required when ordering. The drawing should contain the information shown in Figure A.
Pin Dimensions
Figure A
Solderable Pins
(0.138)
3.50
Stand-off = 0mm
View from component side
Dimensions “B” and “C” are not required for a heat sink with only 1 solderable pin
Dimension “C” is not required for a heat sink with 2 solderable pins
Tolerance ± 0.2 mm
Standard Stand-off = 0 mm
NOTE: We suggest that soldering and mechanical resistance tests are made by customer before full production.
"A"
(0.083)
2.10
"B"
AMERICA
1 mm
3 mm
5 mm
EXTRUSION LENGTH "L"
EUROPE
(0.138)
3.50
Italy Tel: [phone] email: [e-mail]
United Kingdom Tel: [phone] email: [e-mail]
USA Tel: [phone] email: [e-mail]
(0.039)
Stand-off = 1mm
1.00
"C"
(0.083)
2.10
(0.138)
3.50
(0.118)
Stand-off = 3mm
3.00
"S"
The Max Clip System
The suggested hole dia. in the PCB is 2.7 ± 0.1
mm with a pitch tolerance of ± 0.15 mm.
(8.268)
2.10
ASIA
(0.083)
2.10
Singapore Tel: [phone] email: [e-mail]
Taiwan Tel: [phone] email: [e-mail]
TM
– patented
(0.138)
3.50
Stand-off “S”
(0.197)
Stand-off = 5mm
5.00
(0.083)
2.10