PMD1204PQB1-A (2) F Sunon Fans, PMD1204PQB1-A (2) F Datasheet - Page 8

• Manufacturer Part Number: PMD1204PQB1-A (2) F
• Description: FAN 12VDC 40X28MM 19CFM W/TACH
• Manufacturer: Sunon Fans
• Series: PMDr

Specifications of PMD1204PQB1-A (2) F

• Rohs Status: RoHS non-compliant
• Fan Type: Tubeaxial
• Size / Dimension: Square - 40mm L x 40mm H x 28mm W
• Voltage - Rated: 12VDC
• Power (watts): 4.00W
• Features: Speed Sensor (Tach)
• Rpm: 11300 RPM
• Noise: 45 dB(A)
• Static Pressure: 0.800 in H2O (199.3 Pa)
• Air Flow: 19.0 CFM (0.53m³/min)
• Termination: 3 Wire Leads
• Bearing Type: Ball
• Weight: 0.088 lb (39.92g)
• Current Rating: 330mA
• Voltage Range: 10.2 ~ 13.8VDC
• Operating Temperature: 14 ~ 158°F (-10 ~ 70°C)
• Termination Style: 45 dB(A)
• Other names: 259-1269; PMD1204PQB1-A(2) F; PMD1204PQB1-A(2)F

建準電機工業股份有限公司
建準電機工業股份有限公司
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
建準電機工業股份有限公司
建準電機工業股份有限公司
10.Not all fans incorporate the Lock Rotor Protection feature. For fans that do not
11.During installation, caution should be taken when mounting the fan. Incorrect
12.
13.Unless otherwise stated, all tests are carried out at relative temperature and humidity
1. SUNON will not guarantee the products if the application conditions exceed those
5. This specification sheet precedes all other information and should be used as the
9. Always ensure that fans are stored according to the storage temperatures specified.
2. A written request should be submitted to SUNON prior to acceptance if deviation
3. Caution should be exercised when handling the fan. Damages may be resulted
4. No guarantee on the products against the safety problem or failure caused by powder
6. To satisfy the SUNON Management Information System, please indicate SPEC. NO.
7. It is important that the correct polarity is established before connecting the fan to the
8. SUNON fans are not suitable to be used in an environment that contains aggressive
Notes
During testing it is important to consider safety at all times. A suitable guard should
mounting can cause excess resonance, vibration and noise.
set out in this specification.
from this specification is required.
when apply pressure to the impeller or hold the fan by the lead wires.
dust, drop of water or insect.
on every order.
or corrosive fluids.
Do not store in an environment with a high humidity level. If the fans were stored for
longer than 6 months, it is highly recommended to apply functional testing before
shipping.
incorporate this feature it is important not to prevent the rotation of the impeller.
Doing so, will lead to failure.
be fitted to the fan to prevent personal injury.
conditions of 25 ℃ ℃ ℃ ℃ , 65%.
principal reference for the product to which it refers.
electrical supply. Black (0V) , Red(+V). If cautions is not taken, immediate damage
may occur on fans that do not have polarity protection.
SPEC.NO
ISSUE DATE 08. 30. 2002 E D I T I O N 0
P A G E
8 OF 8
Y108047
REVISE DATE
SUNON