104549-8 TE Connectivity, 104549-8 Datasheet - Page 3

• Manufacturer Part Number: 104549-8
• Description: Conn Shrouded Header HDR 60 POS 1.27mm Solder ST SMD Tube
• Manufacturer: TE Connectivity
• Type: Shrouded Headerr
• Series: AMPMODU System 50 Seriesr

Specifications of 104549-8

• Pitch: 1.27 mm
• Number Of Rows: 2
• Number Of Contacts: 60
• Gender: HDR
• Contact Plating: Gold Over Nickel
• Termination Method: Solder
• Product Type: Headers
• Mounting Style: SMD/SMT
• Mounting Angle: Vertical
• Number Of Positions / Contacts: 60
• Housing Material: Thermoplastic, Glass Filled
• Contact Material: Phosphor Bronze
• Voltage Rating: 30 VAC
• Connector Type: Header
• Shrouded: Yes
• Mount Angle: Vertical
• Pcb Mount Style: Surface Mount
• Pcb Mount Retention: With
• Hold-down Post Material: Copper Alloy
• Hold-down Post Plating: Tin-Lead over Nickel
• Voltage (vac): 30
• Insulation Resistance (m?): 5,000
• Dielectric Withstanding Voltage (v): 500
• Termination Post Length (mm [in]): 2.54 [0.100]
• Solder Tail Contact Plating: Tin-Lead
• Number Of Positions: 60
• Pcb Mount Retention Type: Hold Down Post(s)
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30)
• Connector Style: Plug
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: ELV compliant, 5 of 6 Compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Approved Standards: UL E28476, CSA LR7189
• Temperature Range (°c): -65 – +105
• Packaging Method: Tube
• Lead Free Status / Rohs Status: No

Durability.
Contact retention.
Mating force.
Unmating force.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Mixed flowing gas.
Rev B
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 2.
See Note.
Contacts shall not dislodge.
5 ounces maximum per contact.
.8 ounce minimum per contact.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
TE Spec 109-27.
Mate and unmate samples for 200
cycles at maximum rate of 150
cycles per hour.
TE Spec 109-30.
Apply axial load of 2 pounds to
contacts in mating direction.
TE Spec 109-42, Condition A.
Measure force necessary to mate
samples a distance of .100 inch
from point of initial contact at
maximum rate of .5 inch per minute.
TE Spec 109-42, Condition A.
Measure force necessary to unmate
samples at maximum rate of .5 inch
per minute.
TE Spec 109-22.
Subject mated samples to 5 cycles
between -65 and 105° C.
TE Spec 109-23-4, Condition B.
Subject mated samples to 10 cycles
between 25 and 65° C at 95% RH.
TE Spec 109-43.
Subject mated samples to
temperature life at 118° C for 792
hours.
TE Spec 109-85-3.
Subject mated samples to
environmental class III for 20 days.
Procedure
108-1093
3 of 8