104068-5 TE Connectivity, 104068-5 Datasheet - Page 2

• Manufacturer Part Number: 104068-5
• Description: Conn Shrouded Header HDR 50 POS 1.27mm Solder ST Thru-Hole Tube
• Manufacturer: TE Connectivity
• Type: Shrouded Headerr

Specifications of 104068-5

• Pitch: 1.27 mm
• Number Of Rows: 2
• Number Of Contacts: 50
• Gender: HDR
• Contact Plating: Gold Over Nickel
• Termination Method: Solder
• Peak Reflow Compatible (260 C): No
• Terminal Type: Straight PCB Thru Hole
• Connector Shroud: Yes
• Body Material: Thermoplastic
• Leaded Process Compatible: No
• Rohs Compliant: No
• Connector Type: Header
• Shrouded: Yes
• Mount Angle: Vertical
• Pcb Mount Style: Through Hole
• Pcb Mount Retention: Without
• Voltage (vac): 30
• Insulation Resistance (m?): 5,000
• Dielectric Withstanding Voltage (v): 500
• Termination Post Length (mm [in]): 2.54 [0.100]
• Solder Tail Contact Plating: Tin-Lead
• Number Of Positions: 50
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30)
• Connector Style: Plug
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: ELV compliant, 5 of 6 Compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C, Reflow solder capable to 245°C, Reflow solder capable to 260°C, Pin-in-Paste capable to 245°C, Pin-in-Paste capable to 260°C
• Approved Standards: UL E28476, CSA LR7189
• Temperature Range (°c): -65 – +105
• Packaging Method: Tube

3.4.
3.5.
Examination of product.
Termination resistance.
Insulation resistance.
Dielectric withstanding voltage.
Temperature rise vs current.
Vibration, sinusoidal.
Physical shock.
Durability.
Rev C
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per Test Specification 109-1.
Test Requirements and Procedures Summary
Test Description
Meets requirements of product
drawing and Application
Specification 114-10038.
See Figure 3.
5000 megohms minimum.
One minute hold with no breakdown
or flashover.
30EC maximum temperature rise at
specified current.
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
Visual, dimensional and functional
per applicable quality inspection
plan.
TE Spec 109-6-6.
Subject mated contacts assembled
in housing to 20 millivolts maximum
open circuit at 100 milliamperes
maximum.
See Figure 4.
TE Spec 109-28-4.
500 volts DC, 2 minute hold.
Test between adjacent contacts of
mated specimens.
TE Spec 109-29-1.
1500 volts AC at sea level.
Test between adjacent contacts of
mated specimens.
TE Spec 109-45-1.
Measure temperature rise vs
current.
See Figure 5.
TE Spec 109-21-3.
Subject mated specimens to 10-
2000-10 Hz traversed in 20
minutes. Four hours in each of 3
mutually perpendicular planes.
See Figure 6.
TE Spec 109-26-1.
Subject mated specimens to 50 G's
half-sine shock pulses of 11
milliseconds duration. Three shocks
in each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 6.
TE Spec 109-27.
Mate and unmate specimens for
500 cycles at a maximum rate of
600 cycles per hour.
Procedure
108-1579
2 of 8