103328-7 TE Connectivity, 103328-7 Datasheet - Page 205

• Manufacturer Part Number: 103328-7
• Description: Conn Unshrouded Header HDR 14 POS 2.54mm Solder ST Thru-Hole
• Manufacturer: TE Connectivity
• Type: Unshrouded Headerr

Specifications of 103328-7

• Pitch: 2.54 mm
• Number Of Rows: 2
• Number Of Contacts: 14
• Gender: HDR
• Contact Plating: Tin-Lead Over Nickel
• Termination Method: Solder
• Rohs Compliant: NO
• Agency Approvals: CSA, UL
• Angle: Straight
• Brand/series: AMPMODU/MOD II Series
• Centerline, Matrix: 0.100 x 0.100 in.
• Color: Black
• Contact Shape: Square
• Current, Rating: 3 A
• Current, Ratings: 3 A
• Flammability Rating: UL94V-0
• Header Type: Breakaway
• Insulation Resistance: 5000 Megohms
• Length, Overall: 0.684 "
• Length, Pin: 0.23 "
• Length, Terminal Post: 0.12 in.
• Material, Contact: Phosphor Bronze
• Material, Housing: Thermoplastic
• Mounting Type: PCB Mount
• Number Of Positions: 14
• Pin Spacing: 0.1 "
• Plating, Contact Mating Area: Tin-Lead
• Plating, Contact Termination Area: Tin-Lead over Nickel
• Post Size: 0.025 in.
• Primary Type: Interconnect System
• Special Features: Breakaway
• Standards: UL Listed, CSA Certified
• Temperature, Operating: -65 to +105 °C
• Termination: Thru-Hole
• Product Type: Connector
• Mount Angle: Vertical
• Pcb Mount Retention: Without
• Surface Mount Compatible: No
• Board Standoff: Without
• Mounting Ears: Without
• Mating Connector Lock: Without
• Post Size (mm [in]): 0.64 [.025]
• Mating Post Length (mm [in]): 5.84 [0.230]
• Panel Mount Retention: Without
• Current Rating (a): 3
• Insulation Resistance (m?): 5,000
• Dielectric Withstanding Voltage (v): 750
• Termination Post Length (mm [in]): 3.05 [0.120]
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Centerline (mm [in]): 2.54 [0.100]
• Row-to-row Spacing (mm [in]): 2.54 [0.100]
• Selectively Loaded: No
• Mount Type: Printed Circuit Board
• Contact Plating, Mating Area, Material: Tin-Lead
• Contact Base Material: Phosphor Bronze
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Wave solder capable to 240°C
• Approved Standards: UL E28476, CSA LR7189
• Operating Temperature (°c): -65 – +105
• High Temperature Housing: No
• High Speed Serial Data Connector: No

Material
Black thermoplastic, flame retardant
Part Numbers
499991-2 (Packaged 50 per bag)
499991-3 (Packaged 1000 per bag)
Related Product Data
Low Profile Headers used with —
pages 135-140
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
are metric equivalents.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
AMPMODU Interconnection System
Accessories: Snap-In Polarizer for Low Profile Headers
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Orient the polarizer so that the
polarizer latch is on the same side
as the inner wall (post side) of the
header housing.
Slide the polarizer over the
polarizing slot of the housing until
the latch engages the hole. Snap
off the tab at the break line next to
the housing. Using the remaining
polarizer, repeat the process for the
other housing location.
Note: For Post Shunts, contact Tyco Electronics.
Note: All part numbers are RoHS compliant.
The snap-in polarizer provides military polarization for low
profile headers. Installation of the polarizer is as follows:
[8.51]
[8.51]
.335
.335
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
[3.40]
.134
[3.40]
.134
(See below.)
Break Line
(See below.)
Break Line
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Break Line
205
5