1658615-4 TE Connectivity, 1658615-4 Datasheet - Page 13

• Manufacturer Part Number: 1658615-4
• Description: Conn D-Subminiature PIN 9 POS 2.77mm IDT RA Cable Mount 9 Terminal 1 Port
• Manufacturer: TE Connectivity
• Type: D-Subminiaturer
• Series: AMPLIMITE HDF-20r

Specifications of 1658615-4

• Gender: PIN
• Pitch: 2.77 mm
• Termination Method: IDT
• Mounting: Cable Mount
• Body Orientation: Right Angle
• Number Of Contacts: 9POS
• Number Of Terminals: 9
• Plug / Receptacle: PIN
• Contact Plating: Au over Pd Ni
• Contact Pitch (mm): 2.77mm
• Mounting Style: Cable
• Number Of Ports: 1Port
• Number Of Contact Rows: 2
• Operating Temp Range: -55C to 105C
• Housing Material: Thermoplastic
• Contact Material: Phosphor Bronze
• Operating Voltage (max): 250VAC
• Product Length (mm): 30.88mm
• Product Depth (mm): 12.59mm
• Product Height (mm): 18.56mm
• Connector Type: D Sub
• No. Of Contacts: 9
• D Sub Shell Size: DE
• Connector Body Material: Plastic
• Contact Termination: IDC / IDT
• Rohs Compliant: Yes
• Agency Approvals: UL Recognized, UL Listed and CSA Certified
• Angle: Straight
• Application: Commercial
• Brand/series: HDF-20
• Current, Rating: 1.25 A
• Diameter, Insulation: 0.032-0.038 "
• Flammability Rating: UL 94V-0
• Material, Contact: Phosphor Bronze
• Material, Housing: Thermoplastic
• Number Of Rows: 2
• Primary Type: D-Subminiature
• Shell Size: 1
• Special Features: Strain Relief
• Strain Relief: Straight
• Termination: IDC⁄Ribbon
• Voltage, Rating: 250 VAC
• Wire, Awg: 28-26
• Product Type: Connector
• Product Series: HDF-20 (Ribbon Cable)
• Wire/cable Type: Ribbon Cable
• Termination Method To Wire/cable: Insulation Displacement Crimp (IDC)
• Mating Connector Lock: With
• Mating Connector Lock Type: Mounting Holes
• Shell Type: All Plastic
• Grounding Indents: With
• Grade: Standard
• Profile: Low
• Color: Black
• Cover Material: Thermoplastic
• Solder Tail Contact Plating: Tin over Nickel
• Number Of Positions: 9
• Wire Range (mm² [awg]): 0.08 - 0.15 [28-26]
• Cable Insulation Diameter (mm [in]): 0.81 – 0.97 [0.032 – 0.038]
• Ribbon Cable Centerline Spacing (mm [in]): 1.27 [0.050]
• Optional Cable Stabilizer: 747275-4
• Strain Relief Part Number: 747275-4
• Preloaded: Yes
• Contact Type: Pin
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold Flash over Palladium Nickel or Gold (30) over Nickel
• Contact Size: 20
• Enclosure: Without
• Connector Style: Plug
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Lead Free Status / RoHS Status: Compliant
• Lead Free Status / RoHS Status: Compliant

102
HDP-20 contacts may be
applied by a variety of hand
tools and machines. For
low production runs, repairs
and prototype work, we
offer either our premium
CERTI-CRIMP Hand Tool
or our commercial
PRO-CRIMPER II Hand Tool.
For medium-volume
production, you have the
choice of our AMP-O-LECTRIC
Model “G” Terminating
Machine, our new Model
“M” Terminating Machine, or
our AMP-O-MATIC Model II
Stripper-Crimper Machine.
The Stripper-Crimper is typi-
cally used for terminating
the wires of jacketed cable.
All three machines can be
bench mounted.
For production requirements
ranging from non-stop high
volumes to countless series
of short runs, our popular
AMPOMATOR CLS IV+ fully-
automated lead-making
machine is an ideal choice.
For further information
about these or other
Tyco Electronics hand tools
and machines, call the
Tyco Electronics Tooling
Assistance Center at
1-800-722-1111.
Catalog 82068
Revised 1-08
www.tycoelectronics.com
are metric equivalents.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
AMPLIMITE Subminiature D Connectors
HDP-20 Application Tooling
Note: All part numbers are RoHS compliant.
This versatile machine
now incorporates two
AMP-O-LECTRIC Model “G”
Terminating Units. Basically,
it produces single-wire
leads in lengths from 1.62
[41.2] to 1000 [25 400]. It
measures, cuts, strips and
terminates wire sizes from
26 to 10 AWG [0.12 to 6 mm
stranded and 26 to
16 AWG [0.12 to 1.4 mm
solid. Production rates
range up to 4800 leads per
hour for 3 [76.2] lengths.
The machine is micropro-
cessor controlled, and pro -
grammed and operated with
AMPOMATOR CLS IV+ Lead-Making Machine
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
2
]
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
2
]
an easy-to-follow, menu-dri-
ven touchscreen. It can
retain data for up to 200
lead assemblies. Off-line
programming is also pos-
sible with optional software
OffLine-Plus for Windows
95, Part No. 189263-2.
Air requirement is 90 psi
[6.21] bar minimum at
15 scfm [0.0071 m
requirement is single-phase
220 VAC, 50 or 60 Hz, 25 A.
For further information
request Catalog 124324.
3
/s]. Power
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208