W2E142-BB05-01 EBM-Papst Industries Inc, W2E142-BB05-01 Datasheet - Page 8

• Manufacturer Part Number: W2E142-BB05-01
• Description: FAN EXH 172 X 150 X 38MM 115VAC
• Manufacturer: EBM-Papst Industries Inc
• Series: W2E142r
• Type: Roundr

Specifications of W2E142-BB05-01

• Current Type: AC
• Supply Voltage: 115 V
• Bearing Type: Ball
• Fan Type: Tubeaxial
• Size / Dimension: Rectangular/Rounded- 172mm L x 150mm H x 38mm W
• Voltage Rating: 115VAC
• Power (watts): 28W
• Rpm: 3350 RPM
• Noise: 57 dB(A)
• Air Flow: 230.0 CFM (6.51m³/min)
• Termination: 2 Terminals
• Weight: 1.8 lbs (816.47g)
• Termination Style: 57 dB(A)
• Speed: 3300 RPM
• Frame Dimensions (mm): 150 mm x 38 mm
• Housing Material: Aluminum Die-Cast
• Power Rating: 24 W
• External Height: 150mm
• External Width: 172mm
• External Depth: 38mm
• External Diameter: 152.5mm
• Flow Rate: 230CFM
• Noise Rating: 57dBA
• Brand/series: W2E142
• Dimensions: 5.91 x 6.77 x 1.5 "
• Direction: Exhaust over Struts
• Noise Level: 57 dBA
• Power, Rating: 24 W
• Size: 5.91 x 6.77 x 1.5 (150 x 172 x 38) In. (mm)
• Temperature, Operating, Maximum: +70 °C
• Voltage, Rating: 115 VAC
• Diameter: 152.5mm
• Flow Rate - Imperial: 230CFM
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Static Pressure: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 381-1063; W2E142BB0501

4.5 Checking the connections
4.6 Switch on device
4.7 Switching off the device
Item no.: 10948-5-9970 · Revision status: KM70969 · Print-out on 02/12/2010 · Created by A. Kehm (VM---) · Page 8 of 9
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone: [phone] · Fax: [phone] · [e-mail] · www.ebmpapst.com
W2E142-BB05-01
Make sure that the power is off (all phases).
Secure it from being switched on again.
Check that the mating connector is correctly locked into the panel
connector.
Check that the mating connector is correctly crimped to the
connection line.
Inspect the device for visible external damage and the proper function
of the protective features before switching it on.
Check the air flow paths of the fan for foreign objects and remove any
that are found.
Apply the nominal voltage to the voltage supply.
Disconnect the device from the supply voltage.
WARNING
Hot motor housing
Fire hazard
Ensure that no combustible or flammable materials are
located close to the fan.
Operating instructions
5. MAINTENANCE, MALFUNCTIONS, POSSIBLE
CAUSES AND REMEDIES
Motor and electronics enclosure are sealed by ebm-papst. Changes or
repairs may be carried out by ebm-papst only.
Do not perform any repairs on your device. Return the device to ebm-
papst for repair or replacement.
Malfunction/error
Motor does not turn
Impeller running
roughly
WARNING
Terminals and connections have voltage even with a
unit that is shut off
Electric shock
CAUTION
Electrical load on the capacitor after device is switched off
Electric shock, risk of injury
CAUTION
The motor restarts automatically when operating voltage
is applied, e.g. after a power failure.
Danger of injury
If the device remains out of use for some time, e.g. when in
storage, we recommend switching the device on for at least 2
hours to allow any condensate to evaporate and to move the
bearings.
Wait for five minutes after disconnecting the voltage at all
poles before touching the unit.
Discharge the capacitors before working on the device.
Keep out of the danger zone of the device.
When working on the device, switch off the mains
supply voltage and secure the latter from being switched on
again.
Wait until the device stops.
Possible cause
Mechanical blockage
Mains supply
voltage faulty
Faulty connection
Thermal overload
protector responded
Imbalance in rotating
parts
Possible remedy
Switch off, de-
energise, and
remove mechanical
blockage
Check mains supply
voltage, restore
power supply
Correct connection,
see connection diagram
Allow motor to cool
off, locate and rectify
cause of error, if
necessary cancel
restart lock-out
Clean the device; if
imbalance is still
evident after
cleaning, replace
device.
If you have
attached any weight
clips during cleaning,
make sure to
remove them
afterwards.