HEDS-6510#013 Avago Technologies US Inc., HEDS-6510#013 Datasheet - Page 11
![Encoders Centering Tool HEDX-65XX 8mm](/photos/16/35/163588/av02-0991en_sml.jpg)
HEDS-6510#013
Manufacturer Part Number
HEDS-6510#013
Description
Encoders Centering Tool HEDX-65XX 8mm
Manufacturer
Avago Technologies US Inc.
Datasheet
1.HEDS-6510013.pdf
(14 pages)
Specifications of HEDS-6510#013
Supply Voltage
5 V
Operating Temperature Range
- 40 C to + 100 C
Product
Tools & Accessories
Size / Dimension
8 mm
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
11
3
4
ALIGN ENCODER MODULE AND CODEWHEEL AS SHOWN.
BE CAREFUL NOT TO DAMAGE THE ENCODER INTERNAL COMPONENTS
WITH THE CODEWHEEL.
BRING THE ENCODER MODULE AND CODEWHEEL DOWN SUCH THAT
THE ENCODER MODULE LOCATING HOLES (ON ITS UNDERSIDE)
MATE WITH THE BASEPLATE ROUND PINS. THE BASEPLATE SQUARE
PINS SHOULD SEAT INTO THE ENCODER MODULE MOUNTING
THRU HOLES.
CONCURRENTLY, BRING THE CODEWHEEL DOWN ONTO THE
MATING SHAFT.
CHOOSE CENTERING CYLINDER OR UNDERSIDE LOCATING PINS.
CENTERING CYLINDER: LOCATE ENCODER BASEPLATE WITH
CENTERING CYLINDER. WHEN IN PLACE, TIGHTEN MOUNTING SCREWS.
LOCATING PINS: WITH LOCATING PINS PROPERLY SEATED IN
CORRESPONDING RECEIVING HOLES IN ENCODER BASEPLATE,
TIGHTEN MOUNTING SCREWS.
LOCATE ENCODER MODULE AND CODEWHEEL
LOCATE ENCODER BASEPLATE
HEDL-65XX fig 14
HEDL-65XX fig 13