5536603-1 TE Connectivity, 5536603-1 Datasheet - Page 10

• Manufacturer Part Number: 5536603-1
• Description: Conn Backplane HDR 8Power POS 2mm Press Fit ST Thru-Hole
• Manufacturer: TE Connectivity
• Type: Backplaner
• Series: 5536603r

Specifications of 5536603-1

• Pitch: 2 mm
• Number Of Rows: 4
• Number Of Contacts: 8Power
• Termination Method: Press Fit
• Mounting: Through Hole
• Contact Plating: Gold Over Nickel|Gold Over Palladium Nickel Over Nickel
• Rohs Compliant: YES
• Number Of Positions / Contacts: 8
• Mounting Angle: Vertical
• Mounting Style: Press Fit
• Termination Style: Pin
• Housing Material: Liquid Crystal Polymer
• Contact Material: Phosphor Bronze
• Product Type: Connector
• Connector Type: Header
• Pcb Mounting Orientation: Vertical
• Post Type: Press-Fit
• Make First / Break Last: No
• Module Type: Power
• Number Of Power Positions: 8
• Pin Header Width (mm [in]): 16.00 [0.622]
• Voltage Rating (vac): 30
• Sequencing: Yes
• Sequencing Configuration Row A: Mating Post Length 6.5mm, Termination Post Length 4.25mm
• Sequencing Configuration Row B: Mating Post Length 6.5mm, Termination Post Length 4.25mm
• Sequencing Configuration Row C: Mating Post Length 6.5mm, Termination Post Length 4.25mm
• Sequencing Configuration Row D: Mating Post Length 6.5mm, Termination Post Length 4.25mm
• Post Plating: Tin
• Centerline, Matrix (mm [in]): 2.00 x 2.00 [.079 x .079]
• Contact Type: Pin
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30)
• Connector Style: Plug
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Application: Fixed-Board
• Lead Free Status / Rohs Status: Details

Cable Receptacle
Assemblies
Product Facts
■
■
■
■
■
■
■
■
■
Technical Documents
Product Specification
108-2157
Application Specification
114-13112
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Single one-piece housing
design
Terminal Position
Assurance (TPA) Secondary
Locks on contacts help
prevent contact back-out
Pre-assembled made-to-
order cable assemblies
Installation to panel
provides float in X, Y and Z
directions
Insulation crimp on all
contacts
30 microinch (.76 micro-
meters) gold plated
contacts for high reliability
Touch-safe design passes
UL1977 and IEC 60950
finger probe test
AC and DC power in the
same connector —
meets UL & IEC safety
requirements
All MULTI-BEAM XL
products in this section are
RoHS compliant
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Power Connectors & Interconnection Systems
MULTI-BEAM XL Power Distribution Connector System
Cable Receptacle Assemblies
MULTI-BEAM XL Cable
Assemblies allow designers
freedom to connect power
supplies and power
distribution subassemblies
in a wide variety of
applications. Expanding
beyond board-to-board
applications the cable
assemblies are available for
both cable-to-board or
panel-mount applications
and can terminate 8-16
AWG and 22-26 AWG wires
all in one connector, without
using adapter circuit
boards. In addition, the
power contacts are
designed to be able to
accept two-wire terminations
which can further reduce
harness complexity by
reducing or eliminating
mid-wire splices.
For More Information
Internet http://tycoelectronics.com
Check out product information at: http://mbxl.tycoelectronics.com
Technical Support Center 1-800-522-6752
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
The use of high temperature
glass filled housing materials,
redundant contact retention
and high conductivity
contact materials allows
the use of this connector in
very high current density
applications. The features
work together to result in a
highly durable and compact
power connector, which
offers industry leading
minimum millivolt drop
through the connection. The
connector was designed to
pass the UL 1977 and IEC
60950 finger probe test
which makes the connector
touch-safe. The insulation
crimp adds further safety
by keeping the insulation
from being pulled away
from the termination point.
These features eliminate the
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
need for a secondary cable
clamp which often can be
size prohibitive.
The cable connectors
are designed to mate to
the de-facto standard
Tyco Electronics
MULTI-BEAM XL right-angle
or vertical PCB plugs. The
combination of PCB and
cable connections, both
with mixed power
and signal arrangements
provides a universal power
distribution connector
systems.
The cable assemblies are
all RoHS compliant,
designed to specific
customer requirements
and manufactured in
Tyco Electronics’ cable
assembly manufacturing
facilities.
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
19