213920-1 TE Connectivity, 213920-1 Datasheet - Page 6

• Manufacturer Part Number: 213920-1
• Description: Connector Accessories Wire Entry Seal Kit Socket 16 POS Nylon Black Individual
• Manufacturer: TE Connectivity
• Type: Kitr
• Series: CPCr

Specifications of 213920-1

• Seal Material: Silicone
• Cable Diameter Max: 20.07mm
• Connector Shell Size: 17
• Insulation Diameter Min: 0.075"
• Body Material: Nylon
• Rohs Compliant: Yes
• Accessory Type: Wire Entry Seal Kit
• Shell Size: 17
• Thread Size: 15/16-20
• Number Of Positions: 16
• Pressure Plate Material: Nylon
• Pressure Plate Color: Black
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Accepts Wire Insulation Diameter, Range (mm [in]): 1.91 – 3.18 [0.075 – 0.125]
• Packaging Method: Individual
• For Use With: CMC / CPC Series Circular Connectors

6
More information on the
performance of AMP CPC
and metal-shell CPC
connectors is available by
requesting the following
AMP Product Specifications:
108-10024––
CPC Connectors
108-10037––
Type XII Contacts
108-10020––
Size 20 DM and 20 DF
Contacts
108-10040––
Metal-Shell CPC
Connectors
108-10042––
Type III+ Contacts
108-1579––
Sealed CPC Connectors
with Removeable Contacts
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
AMP Circular Connectors for
Commercial Signal and Power Applications
Performance Characteristics — CPC and Metal-Shell CPC Connectors
Test Description
Maintenance
Aging
Contact Retention
Dielectric Withstanding
Voltage (MIL-STD-1344,
Method 3001)
Thermal Shock
Vibration
(MIL-STD-202,
Method 204,
Test Condition B)
Physical Shock
(MIL-STD-202,
Method 213A,
Test Condition A)
Durability
Corrosion (Salt Spray)
(MIL-STD-202, Method 101,
Test Condition B)
Protection Against
Solids
Protection Against
Water
Temperature Life
Insulation Resistance
(MIL-STD-1344,
Method 3003)
Humidity
(MIL-STD-202, Method 103,
Test Condition B)
*For size 16 contacts. Size 8 contacts 25 lb. load, min.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Procedure
Contacts removed and
reinserted 10 times using
applicable tools
Axial load applied to
contact to displace to the
rear of the connector
Connectors subjected to
1500 volts rms at sea
level
Connectors subjected to
five cycles of temperature
change (-55°C and +125°C)
Connectors vibrated
(wired and mated).
Contacts wired in series
with 100 milliamperes
flowing during the test
Connectors shocked
50 G (wired and mated).
Contacts wired in series
with 100 milliamperes
flowing during the test
Connectors mated and
unmated 25 times with tin
plated contacts and 500
times with gold plated
contacts
Mated connectors
subjected to 5% salt
spray for 48 hours
a. Test wire is pushed
b. Mated connectors
Water is projected through
jets against mated
connector from any direction
and then temporarily
immersed in water
Mated connectors
subjected to a temperature
of +125°C for 200 hours
Measurement made
between adjacent contacts
with connector mated
Mated connectors
subjected to 10 days
moisture test
into mated connectors
talcum powder
subjected to circulating
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
Note:
are RoHS Compliant.
All part numbers
Requirements
No damage to contacts
or housings. Contact
retention maintained
Contacts remain in
place when subjected to
a minimum 10 lb. load*
No breakdown or
flashover
No damage
No damage or loosening of
parts. No interruption
of electrical continuity
longer than 10 microseconds
No damage or loosening
of parts. No interruption of
electrical continuity longer
than 10 microseconds
No wear through
damage to plating
No damage
a. Must not touch live parts
b. No dust deposits
No water deposits shall
be observed on mating
surfaces of contacts
or housings
No damage
5000 megohms
minimum ambient
temperature
Minimum insulation
resistance of
100 megohms
observed on mating
surfaces
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341