828922-1 TE Connectivity, 828922-1 Datasheet - Page 3

• Manufacturer Part Number: 828922-1
• Description: Connector Accessories Cavity Plug Natural Loose Piece
• Manufacturer: TE Connectivity
• Type: Cavity Plugr
• Series: 2.5 Mm Systemr

Specifications of 828922-1

• Accessory Type: Cavity Plug
• Gender: Plug
• Body Material: Rubber MVQ-50
• Rohs Compliant: Yes
• Product Type: Connectors
• Shell Style: Plug
• Mounting Style: Straight
• Single Wire Sealing System: No
• Seal Color: Natural
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Loose Piece
• Packaging Quantity: 10,000
• For Use With: 2.5mm Pin Diameter Connector System
• Lead Free Status / Rohs Status: Details

MCON Tabs and
Receptacles for
Fast and Economical
Application
The MCON New Generation
Contact System is mainly used
in the automotive industry.
Each contact consists of a flat
receptacle, which mates with
a flat tab. Base material of
contact spring and body is
copper alloy.
The two-piece contact design
means that the electrical and
mechanical properties are
separated. One end of the
contact body is crimped to
wire and the other end mates
with the matching tab.
MCON Interconnection System
Contact System
Introduction
■
■
■
■
■
■
■
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Protection of the contact
springs
No over elongation of the
contact springs possible
under normal circumstances
No possibility to connect
from the rear side
Protection against
mechanical damage
Good guiding in the cavity
Secondary locking possible
(from 3 directions)
Assembly into housing
fully-automatically
The Main Advantages of the
MCON Contact System are :
■
■
■
■
■
■
■
■
Base material with high
current capacity
8 or more defined contact
points for increased reliability
Improved vibration
resistance
Good guiding inside the
cavity
Protected contact spring
due to the closed box
Overstress protection of the
contact springs
Box with secondary locking
feature
Protected locking lance
Tabs and receptacles can be
applied in both sealed and
unsealed connectors.
MCON contacts can be fast
and economically arranged to
the lead using Tyco Electronics
application tooling.
Main Catalog 1654400-1
Chapter 4 – Issued
Revised
12-2009.
3-2010.
4-3