9-1393792-0 TE Connectivity, 9-1393792-0 Datasheet - Page 350

• Manufacturer Part Number: 9-1393792-0
• Description: Electromechanical Relay DPDT 3A 24VDC 3.872KOhm Through Hole
• Manufacturer: TE Connectivity
• Type: Signal Relayr

Specifications of 9-1393792-0

• Contact Arrangement: DPDT
• Dc Coil Voltage: 24 V
• Coil Current: 6.2 mA
• Mounting: Through Hole
• Relay Construction: Non-Latching
• Coil Voltage Dc: 24V
• Contact Form: 2 Form C
• Voltage Rating (vdc): 220V
• Voltage Rating (vac): 250V
• Dropout Volt (min): 1.2VDCV
• Coil Resistance: 3.872kohm
• Pick-up Voltage (max): 19.2VDC
• Maximum Power Rating: 60W/125VA
• Operate Time: 5ms
• Contact Current Rating: 3A
• Contact Material: AgNi/Au
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Unsealed
• Product Height (mm): 11mm
• Product Depth (mm): 10mm
• Product Length (mm): 20.2mm
• Operating Temp Range: -25C to 85C
• Pin Count: 8
• Mounting Style: Through Hole
• Termination Style: PC Pin
• Package / Case: DIP
• Lead Free Status / Rohs Status: Compliant

1002
Max. Switching Power: 35-320 watts DC (voltage dependent).
Min. Recommended Current: 0.5 amp @ 12VDC.
Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts
Expected Life: 10 million operations, mechanical; 100,000 operations at 20
Initial Dielectric Strength
Between Contacts and Coil: 500V rms.
Coil Data
Voltage: 12 VDC.
Resistance: See Coil Data table.
Nom. Power: 0.55 watts @ 23°C coil temp. and rated coil voltage.
Thermal Resistance: 50°C per actual coil watt in still air with no contact
Features
• 30A, 16VDC switching rating.
• 40A inrush at 16VDC.
• 20A continuous contact rating @ 85°C.
• Immersion cleanable plastic case with knock-off nib for ventilation.
• 60% less volume than other comparable power relays.
• 1 Form A and 1 Form C arrangements in single and dual relay packages.
• Choice of AgNi 0.15 or AgSnO contacts.
Contact Data
Max. Switching Rate: 20 operations per second with no contact load.
Max. Load Current (@ 14VDC Load Voltage):
Coil Data (@ 23°C Coil Temperature)
Arrangements:
Material: AgNi 0.15 - Recommended for inductive loads.
Conditions
All parametric, environmental and life tests are performed according to
EIA Standard RS-407-A at standard test conditions (23°C Ambient, 20-50%
RH, 29.5 ± 1.0" Hg.) unless otherwise noted.
Dimensions are shown for
reference purposes only.
Max. Continuous Current
Max. Break Current
Max. Make Current
AgSnO
AgNi 0.15
Designator
Coil
001
AgSnO - Recommended for high inrush, lamp and capacitive
loads and applications prone to contact material transfer.
Load
amps, 14VDC, resistive load on normally open contact.
1 Form A (SPST-NO) and 1 Form C (SPDT) in single relay
and dual relay configurations.
@ 10 amp contact load.
250 millivolts, maximum, for normally closed contacts
@ 5 amp contact load.
load current.
6 operations per minute for rated life at rated load.
Rated Coil
Voltage
(VDC)
12
Form A
100A
(NO)
30A
30A
40A
Dimensions are in inches over
(millimeters) unless otherwise
specified.
±10% (Ohms)
Resistance
Coil
254
100A
30A
30A
40A
NO
Form C
25A
25A
15A
10A
NC
Must-Operate
Catalog 1308242
Voltage
Issued 3-03
(VDC)
6.9
Overload Current: 50A, 5 sec.
24V Jump Start: 24VDC for 5 minutes conducting rated contact current
Drop Test: Capable of meeting specifications after a 1.0 meter drop
Flammability: UL94-HB or better (meets FMVSS 302).
Notes
(1) Allowable overdrive is rated at ambient temperature of 23°C and 105°C
(2) Current and times are compatible with circuit protection by a typical 25A
Must Operate and Must Release Voltage: See Coil Data table.
Abnormal Operation
Operate Data
Initial Operate Time: 3 milliseconds, typical, with rated coil voltage
Initial Release Time: 1.5 milliseconds, typical, with zero volts applied (for
Environmental Data
Temperature Range: Storage: -40°C to +155°C.
Shock: 20g, 11 milliseconds, half sine wave pulse.
Vibration: (For NC contacts, NO contacts are significantly higher.)
Mechanical Data
Termination: Printed circuit terminals.
Enclosure: Immersion cleanable, sealed plastic cover.
Weight: Sealed: 4 gm (0.14 oz.) approximately.
Specifications and availability
subject to change.
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
V23086
20 Amp Micro K (Single & Dual)
PC Board Relay
for Automotive Applications
fuse. Relay will make, carry and break the specified current.
as stated with no load current flowing through the relay contacts and
minimum coil resistance with power applied for 30 sec. max. (20%
max. duty cycle.)
Must-Release
10-40 Hz., 1.27mm double amplitude.
40-70 Hz., 5g's constant.
70-100 Hz., 0.5mm double amplitude.
100-500 Hz., 10g's constant.
onto concrete in final enclosure.
Voltage
(VDC)
1.5
@ 23°C.
87 .5A, 0.5 sec.
150A, 0.1 sec.
series
Operating: -40°C to +105°C .
applied.
unsuppressed relays after having been energized at
rated coil voltage.)
(2)
@ 23°C
27 .2
TYCO ELECTRONICS
Allowable
Overdrive
(VDC)
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
(1)
@ 105°C
16.5