8863018389 Laird Technologies, 8863018389 Datasheet - Page 26

• Manufacturer Part Number: 8863018389
• Description: EMI Gaskets & Grounding Pads EMI Gasket
• Manufacturer: Laird Technologies

Specifications of 8863018389

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

FINGERSTOCK
MOUNTING METHODS
28
STICKY FINGERS
RIVET MOUNT
Laird Technologies’ shielding devices may be mounted quickly
and easily using any of several different methods. Each
installation method is described in the text that follows.
However, if you run into a unique situation not resolved by
any of these methods, contact Laird Technologies. More
than likely Laird Technologies can provide the exact answer
you need.
RIVET MOUNT
Riveting produces a tight, long-lasting installation.
Either plastic or metal rivets may be used.
SLOT MOUNT
Slot mounted parts are easily installed using slots where bi-
directional movement is required. Simply install part into one
slot and snap it into the second slot or over the edge of the
frame.
ADHESIVE MOUNTING
Sticky Fingers
bonding system, ideal for all-purpose contact strips for metal
cabinets and electronic enclosures, and is unaffected by
temperatures from -67 to 250°F (-55 to121°C).
Simply follow these four easy steps:
1. Remove all grease and oily residue with solvent. Smooth
2. Peel off protective paper backing.
3. Place gasket in correct position. (See mounting methods
the mounting surface with emery cloth.
diagrams A through E.) Press firmly to ensure a good
adhesive bond. Avoid repositioning, which might impair
For additional information on any of the other products available, please contact sales for assistance or visit www.lairdtech.com.
®
®
is an instant, pressure-sensitive adhesive
SLOT MOUNT
CLIP-ON MOUNTING
BI-DIRECTIONAL
ADHESIVE MOUNTING
NOTE: On items where fingers cover the solid portion of the
4. Allow 24 hours minimum curing time.
Standard parts are supplied with nonconductive tape. For
rough surface applications, such as flame-sprayed surfaces,
0.010 in (0,254 mm) thick nonconductive tape is
recommended. Optional conductive tape is also available.
Contact a sales department representative for additional
ordering information.
CLIP-ON MOUNTING
Clip-on gaskets hold firmly in place due to their own spring
characteristics. Simply push the strips onto the edge or
flange of the door or enclosure.
Also available are clip-on gaskets with either “T” or “D”
lances.
WELDING
Welded mounting requires simple, traditional welding
techniques.
SOLDERING
Solder mounting requires normal low temperature soldering
techniques, including cleaning and fluxing of parts with
common copper flux materials.
gasket, pressure may be applied by inserting a mandrel in
the strip and pressing down. For contact strips with
Magnefil
the effectiveness of the adhesive or may bend or kink
the strip.
®
insert, simply press down on the fingers.
^
compression closing applications. Proper positioning of the
shielding gasket must take into consideration the closing
design and the configuration of the mounting surface.
Shielding gaskets may be mounted for either wiping or
A
C
E
INCORRECT POSITION
B
D