DEMOQE128 Freescale, DEMOQE128 Datasheet - Page 19

• Manufacturer Part Number: DEMOQE128
• Manufacturer: Freescale

Specifications of DEMOQE128

• Lead Free Status / RoHS Status: Compliant

DEMOQE128 User Manual
Run demo on 8-bit S08:
4. Give the example a new project name (e.g., Lab3), set the desired
5. Launch the AccelerometerDemo utility from within the
6. See the DEMOQE128 User Manual for more details on the Acceler-
7. Set “ Port” to “ USB COM.”
8. Set “ Baud” rate to 115200.
9. Turn the board power switch to OFF position.
10. Make sure the green 8-bit S08 daughter card is plugged in to the
11. Turn the board power switch to the ON position and make sure that
1. Compile the Accelerometer Application and start the process of pro-
2. From Connection Manager menu, select “ DEMOQE on the USB1”
3. From the Erase and Program Flash menu, click on “ Yes” to allow the
4. Click on the GO button in the debugger to run the application. The
HCS08>Evaluation Board Exam-
ples>DEMOQE128>DEMOQE_Accelerometer_S08.
location, and click “ Create Project.” This will open the Accelerometer
Application for the 8-bit microcontroller.
DEMOQE_Toolkit folder by double-clicking on the Accelerometer-
Demo.exe file.
ometer Demo utility.
board. The board jumpers should all be set to the default settings
shown in the Quick Start Guide.
the debugger window is closed.
gramming it into the flash of the 8-bit QE128 microcontroller by click-
ing on the debugger launch button shown here :
port and click on “ Connect (Reset).”
debugger to mass erase the microcontroller’ s on-chip flash memory
and program it with the new application.
GO button is shown here:
15