282836-8 TE Connectivity, 282836-8 Datasheet - Page 10

• Manufacturer Part Number: 282836-8
• Description: TERMINAL BLOCK, PCB, 5MM, 8WAY
• Manufacturer: TE Connectivity
• Type: Terminal Blockr
• Series: BUCHANANr

Specifications of 282836-8

• Number Of Contacts: 8POS
• Number Of Contact Rows: 1
• Termination Method: Solder
• Contact Plating: Tin
• Mounting Style: Through Hole
• Contact Pitch (mm): 5mm
• Current Rating (max): 13.5/ContactA
• Contact Material: Brass
• Housing Material: Polyamide 6/6
• Gender: PL
• Body Orientation: Straight
• Operating Voltage (max): 300VAC
• Product Height (mm): 10mm
• Product Depth (mm): 8.2mm
• Product Length (mm): 40mm
• Wire Gauge: 16-30
• Connector Type: Eurostyle Terminal Block
• Connector Mounting: PCB
• Pitch Spacing: 5mm
• No. Of Contacts: 8
• Approval Bodies: UL, CSA
• Rohs Compliant: Yes
• Product Type: Connector
• Type Of Connector: Wire Receptacle
• Mount Angle: Vertical
• Screw Material: Brass
• Screw Size: M3
• Screw Plating: Nickel
• Amperes (a): 13.5
• Voltage (vac): 300
• Side Stackable: Yes
• Number Of Positions: 8
• Centerline (mm [in]): 5.00 [0.197]
• Wire Entry Diameter (solid Wire) (mm²): 0.03 – 1.50
• Wire Entry Diameter (stranded Wire) (mm²): 0.03 – 1.00
• Wire Entry Angle: Side
• Closed End: Without
• Stacked Levels: Without
• Interlock: With
• Wire Range (mm [awg]): 0.05-1.40² [30-16]
• Pcb Tail Length (mm [in]): 3.50 [0.138]
• Screw Flange: Without
• Contact Base Material: Brass
• Contact Plating, Mating Area, Material: Tin
• Housing Color: Green
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Lead Free Status / RoHS Status: Compliant

a bare conductor into the wire entry area. Using a
screwdriver, turn the screw in a clockwise direction, the
applied torque causes the screw to lower itself within
the plastic housing. The lowering of the screw causes
the wire protector to compress down and traps the
conductor between the wire protector and the bottom
of the wire cage. To remove the conductor, simply
rotate the screw in a counter clockwise direction to
lower the wire.
TECHNOLOGY OVERVIEW
Rising Cage Clamp
• Intended for use in industrial applications such as instrumentation, industrial controls, data
• Available in single piece PCB mount, or two piece pluggable configurations
• Contacts are supplied wire ready and with captive screws for convenience
Wire Protector
• Intended for use in lighter duty or commercial applications such as security and alarm, or
• Available in single piece PCB mount, or two piece pluggable configurations
• The wire protector prevents the screw from damaging the conductor and/or wire strands
Wire termination is accomplished by first inserting
10
Eurostyle Terminal Blocks
acquisition, and industrial communications products
HVAC controls
a bare conductor into the wire entry area. Using a
screwdriver, turn the screw in a clockwise direction,
the applied torque causes the wire cage, or floor, to
rise. The conductor is held firmly in place between
the floor of the cage and the wire contact. To remove
the conductor, simply rotate the screw in a counter
clockwise direction to lower the wire cage and free
the wire.
Wire termination is accomplished by first inserting