108992640 Lineage Power, 108992640 Datasheet - Page 11

• Manufacturer Part Number: 108992640
• Description: Module DC-DC 1-OUT 0.75V to 3.63V 3A 5-Pin SIP Module
• Manufacturer: Lineage Power
• Type: Non-Inverting|Inverting|Step Up|Step Downr

Specifications of 108992640

• Package: 5SIP Module
• Output Current: 3 A
• Output Voltage: 0.75 to 3.63 V
• Input Voltage: 2.4 to 5.5 V
• Number Of Outputs: 1
• Switching Regulator: Yes

Data Sheet
October 2, 2009
Design Considerations
Output Filtering
The Austin MiniLynx
output ripple voltage and will meet the maximum output
ripple specification with 1 µF ceramic and 10 µF
tantalum capacitors at the output of the module.
However, additional output filtering may be required by
the system designer for a number of reasons. First,
there may be a need to further reduce the output ripple
and noise of the module. Second, the dynamic
response characteristics may need to be customized to
a particular load step change.
To reduce the output ripple and improve the dynamic
response to a step load change, additional capacitance
at the output can be used. Low ESR polymer and
ceramic capacitors are recommended to improve the
dynamic response of the module. For stable operation
of the module, limit the capacitance to less than the
maximum output capacitance as specified in the
electrical specification table.
LINEAGE
POWER
TM
SIP module is designed for low
2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 3A output current
(continued)
Austin MiniLynx
Safety Considerations
For safety agency approval the power module must be
installed in compliance with the spacing and separation
requirements of the end-use safety agency standards,
i.e., UL 60950-1, CSA C22.2 No. 60950-1-03, and VDE
0850:2001-12 (EN60950-1) Licensed.
For the converter output to be considered meeting the
requirements of safety extra-low voltage (SELV), the
input must meet SELV requirements. The power
module has extra-low voltage (ELV) outputs when all
inputs are ELV.
The input to these units is to be provided with a fast-
acting fuse with a maximum rating of 6A in the positive
input lead
.
TM
SIP Non-isolated Power Modules:
11