107586927 Lineage Power, 107586927 Datasheet - Page 11

• Manufacturer Part Number: 107586927
• Description: DC/DC Power Supply Triple-OUT 5V/15V/-15V 5A/0.83A 25W 10-Pin
• Manufacturer: Lineage Power
• Type: Step Downr

Specifications of 107586927

• Output Current: 5|0.83 A
• Output Voltage: 5|15|-15 V
• Input Voltage: 28 V
• Number Of Outputs: 3
• Output Power: 25 W
• Screening Level: Industrial
• Operating Temperature Min Deg. C: -40C
• Operating Temperature Max Deg. C: 100C
• Product Length (mm): 61mm
• Product Height (mm): 12.7mm
• Mounting Style: Through Hole
• Pin Count: 10
• Lead Free Status / Rohs Status: Not Compliant

March 2008
Test Configurations
Figure 19. Output Noise Measurement Test Setup
Figure 20. Triple Output Voltage and Efficiency
Lineage Power
Note: Use the specified ceramic capacitor. Scope measurement
Note: All measurements are taken at the module terminals. When
socketing, place Kelvin connections at module terminals to
avoid measurement errors due to socket contact resistance.
should be made by using a BNC socket. Position the load
between 50 mm (2 in.) and 75 mm (3 in.) from the
module.
η
Measurement Test Setup
=
j
------------------------------------------------------ -
∑
=
3
[
1
V
[
I
+ ( )
V
O j
+ ( )
+
– (
–
(continued)
V
V
I
– ( )
C O M
)
]
]
I
I
I
Oj
×
100
8-810(C).c
8-749(C).c
Design Considerations
Input Source Impedance
The power module should be connected to a low
ac-impedance input source. Highly inductive source im-
pedances can affect the stability of the power module. A
33 µF electrolytic capacitor (ESR < 0.7 ¾ at 100 kHz)
mounted close to the power module helps to ensure
the stability of the unit.
Safety Considerations
For safety-agency approval of the system in which the
power module is used, the power module must be
installed in compliance with the spacing and separation
requirements of the end-use safety agency standard,
i.e., UL-1950, CSA 22.2-950, and EN60950.
For the converter output to be considered meeting the
requirements of safety extra-low voltage (SELV), the
input must meet SELV requirements.
If the input meets extra-low voltage (ELV) require-
ments, then the converter’s output is considered ELV.
The input to these units is to be provided with a maxi-
mum 5 A normal-blow fuse in the ungrounded lead.
18 Vdc to 36 Vdc Input; 25 W
11