FX4C-80S-1.27DSA(71) Hirose, FX4C-80S-1.27DSA(71) Datasheet - Page 9

• Manufacturer Part Number: FX4C-80S-1.27DSA(71)
• Description: Conn Board to Board RCP 80 POS 2.54mm Solder ST Thru-Hole
• Manufacturer: Hirose
• Type: Board to Boardr

Specifications of FX4C-80S-1.27DSA(71)

• Pitch: 2.54 mm
• Number Of Rows: 2
• Number Of Contacts: 80
• Gender: RCP
• Contact Plating: Gold
• Termination Method: Solder

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BConnector Precautions
1. Tolerance Clearance on Mating Side
2. Prefixed Process to Board (Through hole Type)
The effective connecting length of the product is set to
1.5mm. Please use the product to specify the clearance
between the header and the receptacle in the connection
process within 1mm.
If the prefixed work is required for
mounting on the board, please use
the prefixed pin type. (Applicable
board thickness t = 1.6 0.1)
FX4 Series Stacking Height 5 to 11mm Half Pitch Connector
Cautions:When the connector is installed in the
board, the dip post is guided into the board
through-hole in order to prevent the dip
post breakage, and then insert the board in
parallel to the connector so as to push in
the prefixed pin.
A127