V23838-S5-N1 Finisar Corporation, V23838-S5-N1 Datasheet - Page 2

• Manufacturer Part Number: V23838-S5-N1
• Description: Connector Accessories SFP Cage
• Manufacturer: Finisar Corporation
• Type: SFP Cager

Specifications of V23838-S5-N1

• Connector Style: Cage
• Connector Type: SFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Mounting Type: -
• Number Of Positions: -
• Termination: -
• Contact Finish: -
• Contact Finish Thickness: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 775-1059

V23838-S5-N1, V23838-S5-N1-BB Product Specification – August 2003
Description
Finisar is offering its cage for Small Form-factor Pluggable (SFP) transceivers with one
of the most rigid mechanical designs available on the market. The cage is designed for
press fit applications in order to reduce high volume manufacturing effort. Externally bent
bezel contact springs and one-piece construction enhance EMI performance.
Application Notes
• Testing of rear connector may take place before SFP Cage is installed onto host board
• SFP cage mounting holes should be plated with HASL, gold, or immersion silver finish
• For double-sided mounting, host board thickness is .118 in [3.0 mm] minimum per the
• Supports any single sided, belly to belly, or offset belly to belly configuration with a
• Installation of the SFP cage should be done with a solid metal block across the top
• Removal of the cage should be done with an internal solid metal block
• The Finisar SFP cage does not cause any damage when carefully removed; the
• Trapped fluids from washing process must be dried to prevent corrosion beneath the
• Cage retention depends on finished hole size and plating thickness
© Finisar Corporation August 07, 2003 Rev. D
per MSA dimensional recommendations
MSA. For belly-to-belly applications, three mounting feet are removed to avoid
interference (V23838-S5-N1-BB)
minimum pitch of 16.25 mm
surface of the cage. Block dimensions to be controlled by customer
outside profile of the 3D feet is smooth and will not destroy pre-plated host board
mounting holes
SFP cage
Page 2