BFC233841335 Vishay, BFC233841335 Datasheet - Page 12

• Manufacturer Part Number: BFC233841335
• Description: Cap Film 3.3uF 300VAC PP 20% 31 X 21 X 31mm RDL 27.5mm Loose in Box
• Manufacturer: Vishay
• Series: 2222338r

Specifications of BFC233841335

• Package/case: 31(Max) X 21(Max) X 31(Max)
• Mounting: Through Hole
• Capacitance Value: 3.3 uF
• Voltage: 300 Vac
• Dielectric: PP
• Lead Pitch For Radial: 27.5 mm
• Product Depth: 21(Max) mm
• Tolerance: 20 %
• Operating Temperature: -55 to 105 °C
• Capacitance: 3.3UF
• Voltage Rating, Ac: 300V
• Voltage Rating, Dc: 630V
• Capacitor Dielectric Type: POLYPROPYLENE
• Tolerance,: 20%
• Tolerance, -: 20%
• Temp, Op.: ROHS COMPLIANT

MKP338 4 X2
Vishay
www.vishay.com
12
SUB-CLAUSE NUMBER
AND TEST
SUB-GROUP C4
4.15
4.15.1 Initial measurements
4.15.3 Final measurements
SUB-GROUP C5
4.16
SUB-GROUP C6
4.17
SUB-GROUP C7
4.18
Charge and discharge
Radio frequency characteristic
Passive flammability
Class B
Active flammability
Interference Suppression Film Capacitors
For technical questions, contact:
CONDITIONS
10 000 cycles
Charged to 420 V
Discharge resistance:
Capacitance
Tangent of loss angle at 10 kHz
Capacitance
Tangent of loss angle
Insulation resistance
Resonance frequency
Bore of gas jet: Ø 0.5 mm
Fuel: Butane
Test duration for actual volume V in mm³:
V ≤ 250: 10 s
250 < V ≤ 500: 20 s
500 < V ≤ 1750: 30 s
V > 1750: 60 s
One flame application
20 cycles of 4 kV discharges on the test
capacitor connected to U
R
=
---------------------------------------
1.5 x C (dU/dt)
420 V
DC
45.0°
DC
~ 8 mm
RAC
[e-mail]
12 mm
PERFORMANCE REQUIREMENTS
|ΔC/C| ≤ 10 % compared to values
measured in 4.15.1.
Increase of tan δ:
≤ 0.008 for : C ≤ 1 µF or
≤ 0.005 for : C > 1 µF
Compared to values measured in 4.15.1
≥ 50 % of values specified in section
“Insulation resistance” of this specification
≥ 0.9 times value as specified in section
“Resonant frequency” of this specification
After removing test flame from capacitor,
the capacitor must not continue to burn for
more than 10 s. No burning particle must
drop from the sample.
The cheese cloth around the capacitors
shall not burn with a flame.
No electrical measurements are required.
Document Number: 28118
Revision: 22-Dec-10