DEHR33D122KA3B Murata Electronics, DEHR33D122KA3B Datasheet - Page 45

• Manufacturer Part Number: DEHR33D122KA3B
• Description: Cap Ceramic 0.0012uF 2000VDC R 10% 12 X 5mm RDL 7.5mm Bulk
• Manufacturer: Murata Electronics
• Type: Radialr

Specifications of DEHR33D122KA3B

• Package/case: 12(Max) X 5(Max)
• Lead Pitch For Radial: 7.5 mm
• Capacitance Value: 0.0012 uF
• Dielectric: R
• Voltage: 2000 Vdc
• Product Depth: 5(Max) mm
• Tolerance: 10 %

!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
No.
13
15
16
14
17 Life
*
*
1
2
"room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
"C" expresses nominal capacitance value (pF).
Continued from the preceding page.
Soldering Effect
(On-Preheat)
Temperature
Cycle
Humidity (Under
Steady State)
Humidity
Loading
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Item
Appearance
Capacitance
Change
Dielectric Strength
(Between Lead
Wires)
Appearance
Capacitance
Change
Q
I.R.
Dielectric Strength
(Between Lead
Wires)
Appearance
Capacitance
Change
Q
I.R.
Appearance
Capacitance
Change
Q
I.R.
Appearance
Capacitance
Change
Q
I.R.
No marked defect
Within ±2.5%
Per item 4.
No marked defect
Within ±5%
275+5/2C*
350 min. (30pF min.)
1000MΩ min.
Per item 4.
No marked defect
Within ±5%
275+5/2C*
350 min. (30pF min.)
1000MΩ min.
No marked defect
Within ±5%
275+5/2C*
350 min. (30pF min.)
1000MΩ min.
No marked defect
Within ±3%
275+5/2C*
350 min. (30pF min.)
2000MΩ min.
2
2
2
2
min. (30pF under)
min. (30pF under)
min. (30pF under)
min. (30pF under)
Specifications
DEA Series Specifications and Test Methods
First the capacitor should be
stored at 120+0/-5°C for
60+0/-5 sec.
Then, as in figure, the lead wires
should be immersed in solder of
260+0/-5°C up to 1.5 to 2.0mm
from the root of terminal for
7.5+0/-1 sec.
Post-treatment:
The capacitor should be subjected to 5 temperature cycles.
<Temperature Cycle>
Post-treatment:
Set the capacitor for 500+24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
Post-treatment:
Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in 90 to
95% relative humidity.
(Charge/Discharge currentV50mA)
Post-treatment:
Apply a DC voltage of 150% of the rated voltage for
1000+48/-0 hrs. at 125±2°C with a relative humidity of 50%
max. (Charge/Discharge currentV50mA)
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*
Capacitor should be stored for 1 to 2 hrs. at room condition*
Capacitor should be stored for 1 to 2 hrs. at room condition*
Capacitor should be stored for 1 to 2 hrs. at room condition*
Capacitor should be stored for 1 to 2 hrs. at room condition*
Step
1
2
3
4
Temperature (°C)
Test Method
Room Temp.
Room Temp.
125±3
-25±3
Cycle time: 5 cycle
Thermal
Screen
Time (min)
30
30
3
3
Capacitor
Molten
Solder
1.5
to 2.0mm
C85E.pdf
1
1
1
1
1
43
.
.
.
.
.
08.10.29
8