10-257982-16F Amphenol Industrial Operations, 10-257982-16F Datasheet - Page 15

• Manufacturer Part Number: 10-257982-16F
• Description: CRIMP SOCKET CONTACT (SIZE 16) FOR WIRE SIZES 20, 18 AND 16 AWG
• Manufacturer: Amphenol Industrial Operations
• Series: 1r

Specifications of 10-257982-16F

• Rohs Compliant: NO
• Pin Or Socket: Socket
• Size: 16
• Wire Gauge: 16-20 AWG
• Contact Termination: Crimp
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Contact Finish: -
• Contact Finish Thickness: -
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

PT, SP Service Classes
PT and SP connectors are available in the service
classes listed below. Each class, with the exception of
hermetic, offers one or more means of terminating or
supporting a cable or wire bundle. Class “W” is not
available in the SP Series.
“A”
“A” (SR) General duty, with strain relief clamp for
“C”
“E”
“E” (SR) Environmental resistant strain relief clamp
“J”
“P”
“P” (SR) Strain relief clamp suitable for retaining cus-
“W”
“H”*
Style with printed circuit board contacts- see page 20.
Breakaway style - see page 26.
MS/PT Service Classes
The MS/PT Miniature connector is available in the fol-
lowing certified service classes:
“E”
“F”
“P”
General duty; back shell is threaded for con-
duit attachment of MS3057 cable clamp
cable or wire bundle support
Pressurized receptacle; less than 1 cu. in.
per hour leakage at 30 psi over a tempera-
ture range of –65°F to +257°F
Environmental resistant connectors - sup-
plied with a multi-holed grommet and clamp-
ing nut for moisture-proofing individual open
wires
and grommet for moisture proofing individual
wires; provides added wire bundle support
Same as “W” class except with strain relief
Translucent nylon boot for retaining cus-
tomer-applied potting compounds; held in
place by a threaded ring
tomer applied potting compounds, with pro-
vision for wire support
Compressing clamp and neoprene gland for
moisture proofing multi-conductor jacketed
cables. Telescoping sleeves (MS 3420A)
can be used to adapt to cables smaller than
minimum close-down.
Hermetically sealed with compression glass
inserts (see pages 22-25)
Environmental resistant connectors - sup-
plied with a multi-holed grommet and clamp-
ing nut for moisture-proofing individual open
wires
Grommet seal with strain relief clamp
Translucent nylon boot for retaining cus-
tomer-applied potting compounds; held in
place by a threaded ring
13
“A”
general duty
“E” (SR),
MS / “F”
strain relief
“E”,
MS / “E”
open wire seal
“P”,
MS / “P”
potting boot
“W”
cable seal