10450A AGILENT TECHNOLOGIES, 10450A Datasheet
10450A
Manufacturer Part Number
10450A
Description
Test Probe
Manufacturer
AGILENT TECHNOLOGIES
Datasheet
1.10450A.pdf
(1 pages)
Specifications of 10450A
Lead Free Status / RoHS Status
na
HP 10467–
HP 10075A
E2613A
E2613B
E2614A
E2615A
E2615B
E2616A
68701
122
4
Oscilloscope Probes & Accessories
• Easy connection to 0.5mm, 0.65 mm TQFP and PQFP packages
• Reliable contact with little chance of shorting to adjacent pins
• Mechanically noninvasive
• Can be inserted while the board is active
• 3, 8, and 16-signal versions
At one end, Wedge conductor segments are inserted into the space between
IC pins; at the other end, they easily connect to scopes and logic analyzers.
Precise problem-free probing
The HP Wedge probe adapter solves the problem of connecting your
scope or logic analyzer to fine pitch thin quad flat pack (TQFP) and plas-
tic quad flat pack (PQFP) surface mount ICs. It provides accurate,
mechanically noninvasive and reliable electrical contact to 0.5 and 0.65
mm IC packages, with little chance of shorting. It is available in 3-, 8-,
and 16-signal versions.
Easy to insert, then stays put
It works by inserting compressible dual conductors between adjacent
IC pins. The flexible conductors conform to the size and shape of each
leg to ensure tight contact. It’s then a simple matter to connect your
scope or logic analyzer to the HP Wedge.
Electrical reliability
The HP Wedge’s unique design delivers secure redundant contact on
each pin, with little chance of shorting to adjacent pins. The redundant
physical connection created by two contact points on each pin of the IC
and its short electrical length dramatically increases the reliability of
the electrical connection. Since the HP Wedge doesn’t latch directly
onto the IC and doesn’t require expansion beforehand (as a clip does), it
can be inserted while the board is active. Plus, its mechanically nonin-
vasive so it won’t damage your device under test.
These IC clips are the smallest in the industry to date and are suitable
for connecting to PQFP and SOIC SMT packages from 0.5 – 0.8 mm
pitch. The thin body allows clips to be mounted side by side for probing
adjacent IC pins. They are suitable for use with all HP oscilloscope
probes and logic analyzers and have a maximum input voltage of ± 40V
(dc + peak ac)
3- and 8-signal versions for 0.5 and
0.65 mm IC Packages
HP Wedge Probe Adapter
0.5 mm IC Clips
Surface-Mount Probing Accessories
10467-68701 0.5 mm IC Clips
3
Assorted accessories include 10 SMT lead IC clips that interface the HP
10400A series miniature probes to the fine-pitch circuitry.
The HP 10072A includes 10 SMT lead clips which adapt the 10070A fam-
ily of low-cost probes to fine-pitch devices.
HP 10075A 0.5 mm IC Clip Accessory Kit
HP 10075A and HP 10467A 0.5 mm IC Clip Accessory Kit
These kits includes four 0.5mm IC clips (10467-69701) and two dual-
lead adapters for use with the HP passive probes. Plug the probe tip into
one end of the adapter and connect the IC clips to the other end.
HP 10467A is compatible with the HP 10400A family of passive probes.
The 1160A and 10400B family of probes include a dual-lead adapter as a
standard accessory. For these probes the accessory kit is not required.
Order the IC clips 10467-68701.
Ordering Information
E2613A HP Wedge probe adapter, 0.5 mm 3-signal, qty 1
E2613B HP Wedge probe adapter, 0.5 mm 3-signal, qty 2
E2614A HP Wedge probe adapter, 0.5 mm 8-signal, qty 1
E2615A HP Wedge probe adapter, 0.65 mm 3-signal, qty1
E2615B HP Wedge probe adapter, 0.65 mm 3-signal, qty 2
E2616A HP Wedge probe adapter, 0.65 mm 8-signal, qty 1
E2643A HP Wedge probe adapter, 16-signal, qty 1
E2644A HP Wedge probe adapter, 16-signal, qty 1
10467-68701 0.5 mm IC Clips, qty 4
HP 10075A 0.5 mm IC Clip Accessory Kit
HP 10467A 0.5 mm IC Clip Accessory Kit
HP 10450A SMT probe accessory kit
HP 10072A SMT probe accessory kit
HP 10450A SMT Probe Accessory Kit
HP 10072A SMT Probe Accessory Kit
The HP 10075A is compatible with the 10070 family of probes. The
HP 10467A 0.5 mm IC Clip Accessory Kit