N2796A AGILENT TECHNOLOGIES, N2796A Datasheet

TEST PROBE, OSCILLOSCOPE, 10:1, 2GHZ

N2796A

Manufacturer Part Number
N2796A
Description
TEST PROBE, OSCILLOSCOPE, 10:1, 2GHZ
Manufacturer
AGILENT TECHNOLOGIES
Datasheet
1.N2795A.pdf (4 pages)

Specifications of N2796A

Test Probe Type
Oscilloscope
Test Probe Functions
Multi-function
Features
Single-Ended, Active, Built-in Headlight
Bandwidth
2GHz
Cable Length
1.3m
Rohs Compliant
NA
For Use With
InfiniiVision / Infiniium Oscilloscopes
Lead Free Status / RoHS Status
na
• High resistance (1MΩ) and low capacitance (1 pF)
• Wide input dynamic range (±8V) and offset range
• Built-in headlight for better visibility while probing
• Includes various probe tip accessories
• Direct connection to AutoProbe interface (no power
• Provides full system bandwidth with InfiniiVision and
The N2795A/96A are a new generation of low-cost, 1 and
2 GHz single-ended active probes with the AutoProbe inter-
face (compatible with Agilent’s InfiniVision and Infiniium
family of oscilloscopes). These probes integrate many of
the characteristics needed for today’s general-purpose,
high-speed probing - especially in digital system design,
component design/characterization, and educational
research applications. Its 1MΩ input resistance and
extremely low input capacitance (1 pF) provide ultra low
loading of the DUT. This, accompanied with superior signal
fidelity, makes these probes useful for most of today’s digi-
tal logic voltages. And with their wide dynamic range (±8
V) and offset range (±12 V for N2796A, ±8 V for N2795A),
these probes can be used in a wide variety of applications.
For high signal integrity probing, the N2795A 1 GHz and
N2796A 2 GHz active probes are perfect complements to
Agilent’s 500MHz – 600MHz and 1 GHz bandwidth scopes,
respectively. The N2796A 2 GHz probe can also be used
with Agilent’s 2.5 GHz or higher bandwidth Infiniium scope
as a low cost alternative to InfiniiMax probes.
Key Features
input for low loading
(±12V for N2796A, ±8V for N2795A)
supply required)
Infiniium oscilloscopes with bandwidths up to 1 GHz
N2795A/96A
Single-ended Active Probes
Data Sheet
The N2795A/96A are equipped with a pleasant white LED
headlight to illuminate the circuit under test. The probes are
powered directly by the InfiniiVision and Infiniium Autoprobe
interface, eliminating the need for an additional power sup-
ply. The probes also come with a number of accessories that
allow for easy connections to the circuit under test.
A White LED headlight can be turned on to illuminate
the circuit under test for better visibility while probing
N2795A/96A active
probe with standard
accessories

N2796A Summary of contents

Page 1

... And with their wide dynamic range (±8 V) and offset range (±12 V for N2796A, ±8 V for N2795A), these probes can be used in a wide variety of applications. For high signal integrity probing, the N2795A 1 GHz and N2796A 2 GHz active probes are perfect complements to Agilent’ ...

Page 2

... MΩ Model number 50 Ω N2795A N2796A 1 deg C 2 N2795A N2796A 90 deg C 4000 HBM - 2 each spring probe tip - 2 rigid probe tip - 1 each flex nose clip adapter (red and black each copper pad, 10x - 1 each Y-lead adapter each right angle ground each right angle ground ...

Page 3

... Measurement plots Frequency response of N2796A (Vout/Vin) Voltage derating over frequency (N2796A) Time domain step response of N2796A (with Agilent MSO9404A) 3.000 M 1.000 M 100.0 k 10.00 k 1.000 k 100.0 100.0 k 1.000 M 10.00 M Frequency (Hz) Input impedance over frequency (Red = 3 100.0 M 1.000 G 7.000 G measured, Blue = model) ...

Page 4

... Spain 34 (91) 631 3300 Sweden 0200- Switzerland 0800 United Kingdom 44 (0) 118 9276201 Other European Countries: www.agilent.com/find/contactus Revised: July 8, 2010 Product specifications and descriptions in this document subject to change without notice. © Agilent Technologies, Inc. 2010 Printed in USA, October 1, 2010 5990-6480EN ...