TPP1000 Tektronix, TPP1000 Datasheet - Page 7

• Manufacturer Part Number: TPP1000
• Description: PASSIVE VOLTAGE PROBE, OSCILLOSCOPE
• Manufacturer: Tektronix
• Type: Passive Prober

Specifications of TPP1000

• Test Probe Type: Oscilloscope
• Test Probe Functions: Voltage
• Bandwidth: 1GHz
• Cable Length: 1.3m
• Attenuation: 10×
• Cable, Length: 1.3 m
• Input Impedance: 10 MΩ
• For Use With: MSO/DPO4000B & MSO/DPO5000 Series Mixed Signal Oscilloscopes
• Lead Free Status / RoHS Status: na
• Lead Free Status / RoHS Status: na

The P6616 MSO probe offers two eight-channel pods to simplify connecting to your
device.
P6616 MSO Probe
This unique probe design offers two eight-channel pods. Each channel ends
with a probe tip featuring a recessed ground for simplified connection to the
device under test. The coax on the first channel of each pod is colored blue
making it easy to identify. The common ground uses an automotive-style
connector making it easy to create custom grounds for connecting to your
device. When connecting to square pins, the P6616 has an adapter that
attaches to the probe head, extending the probe ground flush with the probe
tip so you can attach to a header. The P6616 offers outstanding electrical
characteristics, having only 3 pF of capacitive loading, a 100 kΩ input
resistance, and capable of acquiring toggle rates as fast as 500 MHz and
pulses as short as 1 ns in duration.
Serial Triggering and Analysis (Optional)
On a serial bus, a single signal often includes address, control, data,
and clock information. This can make isolating events of interest
difficult. The MSO/DPO5000 Series offers a robust set of tools for
Triggering on a specific OUT Token packet on a USB full-speed serial bus. A bus
waveform provides decoded packet content including Start, Sync, PID, Address, End
Point, CRC, Data values, and Stop.
debugging serial buses with automatic trigger and decode on I
RS-232/422/485/UART, and USB serial buses.
Serial Triggering
Trigger on packet content such as start of packet, specific addresses,
specific data content, unique identifiers, etc. on popular serial interfaces
such as I
Bus Display
Provides a higher-level, combined view of the individual signals (clock, data,
chip enable, etc.) that make up your bus, making it easy to identify where
packets begin and end and identifying subpacket components such as
address, data, identifier, CRC, etc.
Bus Decoding
Tired of having to visually inspect the waveform to count clocks, determine
if each bit is a 1 or a 0, combine bits into bytes, and determine the hex
value? Let the oscilloscope do it for you! Once you’ve set up a bus,
the MSO/DPO5000 Series will decode each packet on the bus, and
display the value in hex, binary, decimal (USB only) or ASCII (USB and
RS-232/422/485/UART only) in the bus waveform.
Mixed Signal Oscilloscopes — MSO5000, DPO5000 Series
2
C, SPI, RS-232/422/485/UART, and USB.
www.tektronix.com
2
C, SPI,
7