1147A AGILENT TECHNOLOGIES, 1147A Datasheet - Page 11

• Manufacturer Part Number: 1147A
• Description: Current Oscilloscope Probe, AC/DC, With AutoProbe Interface
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of 1147A

• Bandwidth: 50MHz
• For Use With: Agilent Technologies 6000 & DSO5000 Series Oscilloscopes
• Lead Free Status / RoHS Status: na

Single-ended Active Probes
Agilent N2795A/96A low-cost single-ended active voltage
• High resistance (1MΩ) and low
• Wide input dynamic range
• Built-in headlight
• Direct connection to AutoProbe
• Provides full system bandwidth
The N2795A/96A are a new
generation of low-cost, 1 to 2 GHz
single-ended active probes with the
AutoProbe interface (compatible with
Agilent’s InfiniVision and Infiniium
family of oscilloscopes). These probes
integrate many of the characteristics
needed for today’s general-purpose,
high-speed probing―especially in
digital system design, component
design/characterization, and
educational research applications. Its
1 MΩ input resistance and extremely
low input capacitance (1 pF) provide
ultra low loading of the DUT. This,
accompanied with superior signal
fidelity, makes these probes useful for
most of today’s digital logic voltages.
And with their wide dynamic range
(±8 V) and offset range (±12 V for
N2796A, ±8 V for N2795A), these
probes can be used in a wide variety
of applications.
capacitance (1 pF) input for low
loading
(±8 V) and offset range (±12 V
interface (no power supply
required)
with InfiniiVision and Infiniium
oscilloscopes with bandwidths up
to 1 GHz
for N2796A, ±8 V for N2795A)
For high signal integrity probing,
the N2795A 1 GHz and N2796A
2 GHz active probes are perfect
complements to Agilent’s 500 to
600 MHz and 1 GHz bandwidth
scopes, respectively.
The N2795A/96A are equipped with
a white LED headlight to illuminate
the circuit under test. The probes are
powered directly by the InfiniiVision
and Infiniium Autoprobe interface,
eliminating the need for an additional
power supply. The probes also come
with a number of accessories that
allow for easy connections to the
circuit under test.
* denotes warranted electrical specifications after 20 minute warm-up, all others are typical
For more information about N2795A/96A active probe, refer to the Agilent N2795A/96A
active probe data sheet, literature number 5990-6480EN.
Model number
Probe bandwidth* (-3 dB)
Risetime
System bandwidth
Attenuation ratio (at dc)
Input dynamic range
Non-destructive input voltage
Offset range
DC offset error (output zero)
Low frequency accuracy
Input resistance*
Input capacitance
Output impedance
Max number of probes
supported by InfiniiVision
11
N2795A
1 GHz
350 ps
500/600 MHz (with Agilent’s 500/600 MHz
InfiniiVision/Infiniium oscilloscope) 1 GHz (with
Agilent’s 1 GHz InfiniiVision/Infiniium oscilloscope)
10:1 ± 0.5%
-8 to +8 V (DC or peak AC)
-20 to +20 V
±8 V
±1 mV
0.5% at 70 Hz, 1 Vpp
1 MΩ
1 pF
50 Ω
4
2 GHz
175 ps
±12 V
N2796A