3220120 Pomona Electronics, 3220120 Datasheet - Page 71

• Manufacturer Part Number: 3220120
• Description: MINI ALLIGATOR/STACKING BANANA PLUG
• Manufacturer: Pomona Electronics

Specifications of 3220120

• Insulator Color: Black
• Connector Type B: Minigator Clip
• Cable Color: Black
• Connector Type A: Multi-Stacking Banana Plug
• Cable Length: 12"
• Voltage Rating: 60VDC
• Lead Length: 12"
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Create Your Own Test Leads for Your Own
Specific Needs with the Following:
Test Lead Wire with
Silicone or PVC
Insulation
Do-It-Yourself 4mm Right
Angle Banana Plug
Do-It-Yourself 4mm
Stackable Banana Plug
Do-It-Yourself In-Line Sheathed (4mm) Banana Plug and Jack
*see rating message at start of section.
*see rating message at start of section.
2.3in (58.4mm)
(32.4mm)
1.28in
3.01in (76.45mm)
• 50ft (15.2m) of unterminated 18 AWG
• Choose from heat-resistant silicone or
• Very flexible with 65 strands of 36 AWG
• Create your own test leads with the
• Wide temperature range of -58 to 302°F
*Std. Colors: -0 Black, -2 Red.
See page 32 for more do-it-yourself plugs.
Build your own safety leads with do-it-your-
self safety-sheathed 4mm right-angle
banana plug.
Material: Contacts: nickel-plated brass;
Insulation: lucel acetal polymer.
Rating: IEC1010 1000V Category III**,
20A, 14 to 131°F (-10 to +55°C).
*Std. Colors: -0 Black, -2 Red.
** When plug is correctly assembled and
terminated.
Build your own safety stacking leads with
do-it-yourself safety-sheathed 4mm stack-
able banana plugs.
Material: Contacts: nickel-plated brass,
Insulation: lucel acetal polymer.
Rating: IEC1010 1000V Category III**,
20A, 14 to 131°F (-10 to +55°C).
*Std. Colors: -0 Black, -2 Red.
** When plug is correctly assembled and
terminated.
Model#
6733-*
6734-*
Model# 6729
Model#
test lead wire 50ft (15.2m lengths only.)
PVC insulation.
tinned copper conductor.
adapters shown below.
(-50 to 150°C) with PVC insulation.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
6721To come....
6383
6384
Insulation
Type
Silicone
PVC
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
50ft (15.2m)
50ft (15.2m)
Length
(36.58mm)
1.44in
DMM Accessories and Kits
Kelvin Probes
Kelvin Lead Set with
Kelvin Clips
Kelvin Clip Set
• Safety-rated plugs and jacks for use with any wire
• Plugs fit most sheathed DMM jacks and DMM test
See mating panel jacks (6387 on page 34).
Material: Banana Plug/Jack: brass; Spring: heat treated
beryllium copper; Insulation: Santoprene
Attaches to wire by crimp or soldering.
Rating: IEC1010 CAT II 300V, 15A, +275°F (+135°C) max.
*Std. Colors: -0 Black, -2 Red, -02 Black and Red (2 per pkg).
*Sold in pkgs of 10.
Model#
6383-*
6383-02
6384-*
6384-02
from 22 to 18 AWG with flexible insulation.
leads to make up your own banana plug or jack test
lead or jumper.
www.pomonaelectronics.com
For 4-wire and 2-wire measure-
ments.
Patented design for high precision
rapid testing.
Gold-plated for accuracy.
Easily move from one test point to
another for rapid readings.
For use with 4-wire Kelvin meters
such as Agilent 34401A, and 3458A.
Rating: For CE compliance: not
intended for hand held use at
voltages above 33 Vrms/70 Vdc.
Length: 48in (122cm)
• Gold-plated Kelvin clip jaws
• Silicone insulated 3.3ft (1m)
• Safety sheathed straight DMM
• Clips firmly grip test points for
Rating: For CE compliance: not
intended for hand held use at
voltages above 33 Vrms/70 Vdc.
Model# 6303
Model# 6730
allow 4-wire resistive measure-
ments.
test lead.
plugs for convenient bench use.
low-loss connection.
Plug
Jack
Two gold-plated clips connect
to test points for 4-wire
resistive measurement.
Clips open to 0.25in (6.35mm)
maximum.
Gold-plated plugs and clips.
Rating: For CE compliance:
not intended for hand held
use at voltages above
33 Vrms/70 Vdc.
Overall Length: 26.5in
(67.3cm).
Model# 5940
®
.
71