U1272A AGILENT TECHNOLOGIES, U1272A Datasheet - Page 12
![DIGITAL MULTIMETER, HANDHELD](/photos/27/67/276743/4706848_sml.jpg)
U1272A
Manufacturer Part Number
U1272A
Description
DIGITAL MULTIMETER, HANDHELD
Manufacturer
AGILENT TECHNOLOGIES
Datasheet
1.U1271A.pdf
(19 pages)
Specifications of U1272A
Dmm Type
Handheld
Voltage Measuring Range Dc
30mV To 1000V
Voltage Measuring Range Ac
30mV To 1000V
Current Measuring Range Dc
300µA To 10A
Current Measuring Range Ac
300µA To 10A
Lead Free Status / RoHS Status
na
Temperature specifications
1. The specifications above is specified after 60 minutes of warm-up time.
2. The accuracy does not include the tolerance of the thermocouple probe.
3. Do not allow the temperature sensor to contact a surface that is energized above 30 Vrms or 60 V DC. Such voltages poses a shock hazard.
4. Ensure that the ambient temperature is stable within ±1 ºC and that the Null function is used to reduce the test lead’s thermal effect and temperature
5. When measuring temperature with respect to any temperature calibrator, try to set both the calibrator and multimeter with an external reference
6. The temperature calculation is specified according to the safety standards of EN/IEC-60548-1 and NIST175.
7. Overload protection: 1000 Vrms for short circuits with <0.3 A current.
8. The accuracy for all ranges is specified based on a film capacitor or better, and after the Null function is used to subtract the test
Capacitance specifications
Thermocouple type
offset. Before using Null function, set the multimeter to measure temperature without ambient compensation (°C) and keep the thermocouple probe
as close to the multimeter as possible (avoid contact with any surface that has a different temperature from the ambient temperature).
(without internal ambient compensation). If both the calibrator and multimeter are set with internal reference (with internal ambient compensation),
some deviations may show between the readings of the calibrator and multimeter, due to differences in ambient compensation between the
calibrator and multimeter. Keeping the multimeter close to the output terminal of calibrator will help reduce the deviation.
lead resistance and thermal effect (by shorting the test leads).
1000 nF
1000 µF
Range
100 nF
100 µF
10 mF
10 nF
10 µF
K
J
[7][8]
[1] - [6]
-200 to 1372 °C
-200 to 1200 °C
-328 to 2502 °F
-328 to 2192 °F
Resolution
0.001 mF
0.001 nF
0.001 µF
0.01 nF
0.01 µF
0.1 nF
0.1 µF
Range
Accuracy ± (% of reading + counts of
Resolution
12
U1271A
0.1 °C
0.1 °C
0.1 °F
0.1 °F
1 + 5
1 + 2
1 + 2
1 + 2
1 + 2
1 + 2
1 + 2
least significant digit)
Accuracy ± (% of reading + counts
1% + 1.8 °F
1% + 1 °C
U1271A
of least significant digit)
U1272A
-
-
1 + 5
1 + 2
1 + 2
1 + 2
1 + 2
1 + 2
1 + 2
1%
1%
1%
1%
U1272A
+ 1.8 °F
+ 1.8 °F
+ 1 °C
+ 1 °C