9005A JEWELL / MODUTEC, 9005A Datasheet - Page 18
![MULTIMETER DIGITAL HANDHELD, 3-1/2 DIGIT](/photos/27/66/276671/4151371_sml.jpg)
9005A
Manufacturer Part Number
9005A
Description
MULTIMETER DIGITAL HANDHELD, 3-1/2 DIGIT
Manufacturer
JEWELL / MODUTEC
Datasheet
1.9005A.pdf
(25 pages)
Specifications of 9005A
Dmm Type
Handheld
Voltage Measuring Range Dc
1000
Voltage Measuring Range Ac
750
Current Measuring Range Dc
20µA To 10A
Current Measuring Range Ac
200µA To 10A
Lead Free Status / RoHS Status
na
Notes:
a) The 2M, 20M, and 200M ranges require several seconds to stabilize.
b) The 200M range reads 10 LSD high. To obtain an accurate reading, subtract
c) To obtain the most accurate reading on the 200 Ω range, short the test leads
7.8 Continuity Beeper:
7.8.1 Connect the black test lead to the COM jack and the red test lead to the
7.8.2 Set the RANGE switch to the Diode Test / Continuity Beeper
7.8.3 Connect the test probes to the device or circuit to be tested.
7.8.4 If the resistance of the device or circuit is less than 20 to 100 Ohms, the
Note: The reading displayed on the LCD is not an accurate indication of the
7.9 Diode Test:
7.9.1 Connect the black test lead to the COM jack and the red test lead to the
10 LSD from the indicated value on the LCD.
together and note the “residual resistance” reading. It is typically less than
0.5 Ω . Subtract this value from subsequent readings on the 200 Ω range.
VOLT / OHM / BEEPER / DIODE “V
resistance of the device or circuit being measured.
VOLT / OHM / BEEPER / DIODE “V
“
continuity beeper will sound.
Do not apply voltage or current to the meter when it is set
Do not apply voltage or current to the meter when it is set
to the Diode Test / Continuity Beeper “
to the Diode Test / Continuity Beeper “
” range.
WARNING!!!
WARNING!!!
17
Ω
Ω
” jack.
” jack.
” range.
” range.