72-7228 TENMA, 72-7228 Datasheet - Page 9
![MULTIMETER, DIGITAL, CLAMP, 3-5/6 DIGIT](/photos/27/66/276660/4423422_sml.jpg)
72-7228
Manufacturer Part Number
72-7228
Description
MULTIMETER, DIGITAL, CLAMP, 3-5/6 DIGIT
Manufacturer
TENMA
Datasheet
1.72-7228.pdf
(52 pages)
Specifications of 72-7228
Dmm Type
Clamp
Voltage Measuring Range Dc
6.6V To 600V
Voltage Measuring Range Ac
6.6V To 600V
Current Measuring Range Dc
66A To 1000A
Current Measuring Range Ac
66A To 1000A
Model 72-7228: OPERATING MANUAL
Rules For Safe Operation
To avoid possible electric shock or personal injury, and to avoid possible
damage to the Meter or to the equipment under test, adhere to the following
rules:
Before using the Meter inspect the case. Do not use the Meter if it is
damaged or the case (or part of the case) is removed. Look for cracks or
missing plastic. Pay attention to the insulation around the connectors.
Inspect the test leads for damaged insulation or exposed metal. Check the
test leads for continuity. Replace damaged test leads with identical model
number or electrical specifications before using the Meter.
Do not apply more that the rated voltage, as marked on the Meter , between
the terminals or between any terminal and ground. If the value to be measured
is unknown, use the maximum measurement position and reduce the range
step by step until a satisfactory reading is obtained.
When measurement has been completed, disconnect the connection between
the test leads and the circuit under test, remove the testing leads from
Warning
7