514360-1 Megger, 514360-1 Datasheet - Page 2

• Manufacturer Part Number: 514360-1
• Description: Voltage Detectors
• Manufacturer: Megger

Specifications of 514360-1

• Voltage Measuring Range Ac: 2.3V To 7.2kV
• Meter Display Type: LED
• Display Type: Voltage Detectors and Phasing Testers
• Frequency: 50 Hz to 60 Hz
• Measured Components: Transmission line voltages up to 550 KV
• Lead Free Status / RoHS Status: na
• Lead Free Status / RoHS Status: na

FEATURES AND BENEFITS
I
I
PHASING TESTERS
DESCRIPTION
DETEX Phasing Testers are available in five models for
applications up to 69-kV class systems. The models include
four analog phasing testers and one model with LED
indication.
The analog testers are ideally suited for outdoor testing of
grounded and ungrounded systems, especially in areas
where an LED lamp is not easily visible. The large, 3.5-in.
(89-mm) analog scale is calibrated to indicate the presence
of nominal system voltages; the tester cannot be used to
determine an exact voltage measurement.
The testers are equipped with two fixed-length poles
connected by a flexible, insulated cable. Hand guards are
standard on lower voltage models, while units for use on
higher voltages are fitted with a universal spline mount for
attachment to a standard hot stick. Spline-mounted testers
provide a 10-ft (3-m) nominal spacing between two
energized phases.
The Phasing Tester (cat. no. 510836-1) provides bright LED
indication for easy visibility indoors or where lighting
conditions are poor. Approximate voltage ranges to be
checked can be preset for additional assurance. The
instrument consists of a pair of fixed-length, 43-in.
(1092-mm) poles with hand guards. A flexible, insulated
connecting cable is capable of covering a 7-ft (2.1-m) span
between two energized phases under test.
APPLICATIONS
These two-pole phasing testers may be used on grounded
and ungrounded ac systems to check high-voltage fuses,
test for correct phase connections and test for the absence
of high voltage on de-energized lines or apparatus.
FEATURES AND BENEFITS
I
I
OPTIONAL ACCESSORIES
Piezo Verifier
This essential safety tool is used to confirm the correct
operation of voltage detectors and phasing testers that do
not have a self-testing capability. When the verifier handle
Available in seven models covering a range from
distribution class to transmission line voltages up to
550 kV
Six electronic, beeper-style models and one model with
white LED indicators
Used on grounded or ungrounded ac systems to check
high-voltage fuses, test for correct phase connections
and test for the absence of high voltage on de-energized
lines or apparatus
Five models available for up to 69-kV class systems
Detex
is depressed at the rate of 3 strokes per second, a piezo
crystal generates approximately 1800 volts. This voltage,
when applied to the tip of the detector, tests for integrity
of the current path and proper operation of the indicators.
A high-voltage model provides selectable outputs of 10,
20, and 30 kV.
A three-step procedure of testing the detector with the
piezo verifier, using the detector to test for the absence of
high voltage and then testing the detector again should be
strictly observed in accordance with accepted operating
procedures. Verifier can be used with single- and two-pole
models.
Supplied with case and lead
Length: 7 in. (178 mm)
Weight: 0.75 Ib (0.34 kg)
Pneumatic Glove Tester
This rugged, molded air pump conveniently tests all types of
rubber gloves with a cuff diameter of 5 in. (127 mm) or less. A
built-in check valve retains pressure within the glove as long as
desired. Tester is provided with two fabric-covered elastic sealing
rings.
Length: 5.5 in. (140 mm)
Diameter: 5 in. (127 mm)
Weight: 1.5 Ib (0.7 kg)
Pneumatic glove tester
Distribution line voltage detector
Piezo verifier, Cat. No. 510005 shown
®
Voltage Detectors and Phasing Testers
Voltage Detectors and Phasing Testers
Transmission line voltage detector