SJ5306TRANS 3M, SJ5306TRANS Datasheet - Page 6
![FEET, STICK ON, PK48](/photos/23/26/232637/42246989_sml.jpg)
SJ5306TRANS
Manufacturer Part Number
SJ5306TRANS
Description
FEET, STICK ON, PK48
Manufacturer
3M
Datasheet
1.SJ5009GREY.pdf
(7 pages)
Specifications of SJ5306TRANS
Overall Length
9.5mm
Colour
Transparent
External Diameter
9.5mm
External Length / Height
3.8mm
Pack Quantity
48
Svhc
No SVHC (15-Dec-2010)
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Application
Information
3M
Molded Shapes
SJ-5000 • SJ-5200 • SJ-5300 • SJ-5400 • SJ-5500 • SJ-5700 • SJ-6100 Series
Environmental
Exposure
Shelf Life
TM
Bumpon
TM
Adhesive
Surface Contact
Protective Products
Colored and transparent Bumpon™ products are intended for interior applications
where resilience and other physical properties will remain unchanged. When
exposed to UV light for extended periods some slight discoloration or yellowing
may occur.
Bumpon products may be used outdoors in a protected area with some
discoloration possible; colored Bumpon products may chalk.
Simultaneous exposure to high humidity and temperature may degrade (soften)
the Bumpon product urethane.
Shelf life is 18 months from date of manufacture when stored in original cartons at
60-80˚F (15˚-27˚C) and 40-50% relative humidity.
Application Temperature: 40˚F (5˚C) to 125˚F (52˚C)
Service Temperature: Constant: -30˚F (-34˚C) to 150˚F (66˚C)
To obtain maximum adhesion, surfaces must be unified, dry, and free of
contaminants. Surface contact is essential to adhesive performance. To maximize
contact on a substrate:
• Clean surfaces with low strength solvent such as isopropyl alcohol (rubbing
• Apply firm pressure to help increase the cold flow and contact of the adhesive
• Allow time (dwell) to increase the surface contact and adhesion
*Note: Be sure to follow the manufacturer’s precautions and directions for use when using solvents.
alcohol) or heptane.*
with the substrate.
(see illustration below).
Intermittent: Up to 225˚F (107˚C)
Rubber Adhesive (R-30) vs. Acrylic
Adhesive (A-20) Bond Build Up
High
Low
0
Dwell Time – Hours
24
Rubber
48
FOD# 1537
page 6 of 7
72