PCI-AC51 OPTO 22, PCI-AC51 Datasheet - Page 9

• Manufacturer Part Number: PCI-AC51
• Description: Computers, Interface Cards
• Manufacturer: OPTO 22

Specifications of PCI-AC51

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

header connector. Connections are shown in the diagram below. For additional information, see
Opto 22 form #726, Pamux User’ s Guide.
PamScan PCI also serves as an application example, as
source code is provided for both Visual Basic and Visual C.
1. Locate PamScan PCI in the Toolkit folder under Demo
2. Enter the board’s ID number in the Board ID field. (PCI
3. Set the Reset Level to match the brain configuration on
4. Click Open PCI Card.
IMPORTANT: The reset level set here and the reset level set
on all the Pamux brains in your system must match.
Apps. Double-click PamScan PCI to launch it.
The main window appears, as shown at right.
board ID numbers start at zero.)
the Pamux bus.
We recommend that the Reset Level be set to Low. If
the computer is turned off while racks and brains are
still running, some of the outputs may change state. If
the Reset Level is set to Low, however, in this situation
the brains will reset and the system will go to a safe
state. (Reset level is indicated by LED 1; if reset level is
low, LED 1 is on. See
page
2.)
Pin 1
CHAPTER 1: INSTALLING THE PCI-AC51
PCI-AC51 User’s Guide
5
5