2476TX1 EREM, 2476TX1 Datasheet - Page 4
![Tapered Head Flush-Cut Tip Cutter](/photos/27/30/273047/4606625_sml.jpg)
2476TX1
Manufacturer Part Number
2476TX1
Description
Tapered Head Flush-Cut Tip Cutter
Manufacturer
EREM
Datasheet
1.2476TX1.pdf
(8 pages)
Specifications of 2476TX1
Lead Free Status / RoHS Status
na
Erem Technology
The steel
Erem electronic cutters are made from bright
steel. They are not drop forged. The special
tool steel is made using a unique Swiss
processing technique.
Your advantage:
The high grade tool steel gives the tools
additional strength and toughness.
The internal patented Erem Magic
Spring
The Erem Magic Spring is unique, it is integral
to the cutter head and provides a constant
opening and closing force and is guaranteed
for more than 1 million operations.
Your advantage:
The Magic Spring is reliable, makes the cutter
easy to operate and reduces operator fatigue.
Precision screw joint
The precision screw joint ensures a smooth
cutting action, without play or overlapping of
the jaws and prevents the cutter head sticking
when opening.
Your advantage:
Precise cutting, reduced shock to components.
EMOS Maximum Opening Stop
The unique EMOS Erem Maximum Opening
Stop system limits the blade tips from open-
ing more than 5 mm. Reduces operator
fatigue by preventing excessive hand spread.
Your advantage:
Comfortable and fatigue free working.
Super Full Flush FF
Super Full Flush FF
Super Full Flush FF
Semi Flush SF
Semi Flush SF
Semi Flush SF
Flush F
Flush F
Flush F
Erem Cut super full flush:
perfect flush cut
Cut options
There are 3 cut options:
1. Semi flush
For general cutting applications in which the
shape of the cut is not important. Will cut both
hard and soft wires equally well. Leaves a
wedge shape on the cut leg of the component.
2. Flush
Will cut both hard and soft wires. The blades
are ground to shallower angle than those of
semi flush cutters, this means that the cutting
effort is reduced and the component is sub-
jected to less shock. A much smaller wedge
shape is left on the leg of the component.
Used for general purpose cutting, or where
greater precision is required.
3. Super full flush
Erem super full flush cutters are precision
ground and sharpened. This cut provides
absolutely flush wire ends. No rework is need-
ed. Less effort is required and the components
are subjected to less shock load. This type of
cut is suitable only for soft wires in microelec-
tronics, aerospace and medical engineering
applications.
Erem Cut
Regular “Super full
flush“ cut