3-651-15 EUROLINE CONDUCTIVE BERNSTEIN WERKZEUGFABRIK, 3-651-15 EUROLINE CONDUCTIVE Datasheet

no-image

3-651-15 EUROLINE CONDUCTIVE

Manufacturer Part Number
3-651-15 EUROLINE CONDUCTIVE
Description
CUTTER, MINI SIDE, ESD SAFE
Manufacturer
BERNSTEIN WERKZEUGFABRIK
Datasheet
1.3-672-15_EUROLINE_CONDUCTIVE.pdf (3 pages)

Specifications of 3-651-15 EUROLINE CONDUCTIVE

Overall Length
120mm
Cutter Type
Side
Cutting Capacity Max
1.2mm
Svhc
No SVHC (18-Jun-2010)
Copper Wire Cutting Capacity
1.2mm
Cut Type
Side
Joint Construction
Length
BERNSTEIN-Pliers are made from specially selected top-quality special steels. The blanks are
drop-forged and are then further processed in accordance with the latest production techniques.
BERNSTEIN pliers are oil-hardened and all cutting pliers additionaly undergo subsequent
induction hardening. All pliers are carefully produced for the cutting capacities indicated, either
with a side face for cutting hard and soft wire or without a side face for flush cutting soft wire only.
BERNSTEIN pliers without side faces are marked with a dot on the head of the pliers. In the case
of pliers for electronic engineers, the cutting capacities are indicated on the handle.
All BERNSTEIN pliers are guaranted tools. Defective pliers will be replaced if they contain material
or production defects.
Special design features
Most BERNSTEIN pliers for electronic engineers are produced with a box joint.
As a result of this expensive design, optimum parallel guiding edges is obtained
and the service lifes are long.
The decision to produce a lap joint
or a lay-on joint
is made according to the type of pliers and the use.
60

3-651-15 EUROLINE CONDUCTIVE Summary of contents

Page 1

... BERNSTEIN pliers without side faces are marked with a dot on the head of the pliers. In the case of pliers for electronic engineers, the cutting capacities are indicated on the handle. All BERNSTEIN pliers are guaranted tools. Defective pliers will be replaced if they contain material or production defects. ...

Page 2

... Packing All pliers are supplied in skin packs as standard. Packing in plastic bags can also be selected if required. Both are for recycling. Quantities of 10 pairs of pliers per type are packed in a 3-coloured covered box and are clearly labelled. No.suffix ...

Page 3

... High quality steel Fine polished and bright burnished, for dazzle free working Ergonomically formed bicoloured hand-guard from conductive anti-slide material The pliers of this program have been tested with good results by a well-known electronic group adequate to IEC 61340 CUTTING PLIERS No. Length Finish ...