78Q2120C09-CGTR/F Maxim Integrated Products, 78Q2120C09-CGTR/F Datasheet - Page 16

• Manufacturer Part Number: 78Q2120C09-CGTR/F
• Description: Telecom ICs 10-100 Fast Ethernet Transceiver Twisted
• Manufacturer: Maxim Integrated Products

Specifications of 78Q2120C09-CGTR/F

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MR16: Vendor Specific Register
Page: 16 of 35
16.3:2
16.15
16.14
16.13
16.12
16.11
16.10
16.9
16.8
16.7
16.6
16.5
16.4
BIT
SYMBOL TYPE DEFAULT DESCRIPTION
RVSPOL
TXHIM
INPOL
RPTR
RSVD
RSVD
RSVD
RSVD
RSVD
RSVD
SQEI
NL10
APOL
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R
(0)
0h
0
0
0
0
0
0
0
1
0
1
0
©
Repeater Mode: When set, the 78Q2120C is put into Repeater mode
of operation. In this mode, full duplex is prohibited, CRS responds to
receive activity only and, in 10Base-T mode, the SQE test function is
disabled.
When this bit is ‘0’, the INTR pin is forced low to signal an interrupt.
Setting this bit to ‘1’ causes the INTR pin to be forced high to signal
an interrupt.
Reserved
Transmitter High-Impedance Mode:
transmit pins and the TX_CLK pin are put into a high-impedance
state. The receive circuitry remains fully functional.
SQE Test Inhibit:
testing. By default, this bit is ‘0’ and the SQE test is performed by
generating a COL pulse following the completion of a packet
transmission.
10Base-T Natural Loopback: Setting this bit to ‘1’ causes transmit
data received on the TXD0-3 pins to be automatically looped back to
the RXD[0:3] pins when 10Base-T mode is enabled.
Reserved
Reserved
Reserved
Reserved
Auto Polarity:
78Q2120C is able to automatically invert the received signal due to a
wrong polarity connection. It does so by detecting the polarity of the
link pulses. Setting this bit to ‘1’ disables this feature.
Reverse Polarity: The reverse polarity is detected either through 8
inverted 10Base-T link pulses (NLP) or through one burst of inverted
clock pulses in the auto-negotiation link pulses (FLP). When the
reverse polarity is detected and if the Auto Polarity feature is
enabled, the 78Q2120C will invert the receive data input and set this
bit to ‘1’. If Auto Polarity is disabled, then this bit is writeable. Writing
a ‘1’ to this bit forces the polarity of the receive signal to be reversed.
Reserved: Must set to ‘00’.
2009 Teridian Semiconductor Corporation
During auto-negotiation and 10BASE-T mode, the
Setting this bit to ‘1’ disables 10Base-T SQE
When set, the TXOP/TXON
10/100BASE-TX
Transceiver
78Q2120C
Rev 1.3