LAN9500-ABZJ-TR SMSC, LAN9500-ABZJ-TR Datasheet - Page 23

• Manufacturer Part Number: LAN9500-ABZJ-TR
• Description: Ethernet ICs USB 2.0 to 10/100 Ethernet CTRL TR
• Manufacturer: SMSC

Specifications of LAN9500-ABZJ-TR

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

USB 2.0 to 10/100 Ethernet Controller
Datasheet
SMSC LAN950x Family
3.2
BUFFER TYPE
IS_5V
OCLK
OD12
ICLK
OD8
O12
AIO
PU
PD
O8
IS
AI
P
Buffer Types
Schmitt-triggered Input
5V Tolerant Schmitt-triggered Input
Output with 8mA sink and 8mA source
Open-drain output with 8mA sink
Output with 12mA sink and 12mA source
Open-drain output with 12mA sink
50uA (typical) internal pull-up. Unless otherwise noted in the pin description, internal pull-
ups are always enabled.
Note:
50uA (typical) internal pull-down. Unless otherwise noted in the pin description, internal
pull-downs are always enabled.
Note:
Analog input
Analog bi-directional
Crystal oscillator input pin
Crystal oscillator output pin
Power pin
internal resistors to drive signals external to the device. When connected to a load
that must be pulled high, an external resistor must be added.
on internal resistors to drive signals external to the device. When connected to a
load that must be pulled low, an external resistor must be added.
Internal pull-up resistors prevent unconnected inputs from floating. Do not rely on
Internal pull-down resistors prevent unconnected inputs from floating. Do not rely
Table 3.10 Buffer Types
DATASHEET
23
DESCRIPTION
Revision 1.0 (05-17-10)