A12620-15 Laird Technologies, A12620-15 Datasheet - Page 2

• Manufacturer Part Number: A12620-15
• Description: TFLEX 660 18" X 18"
• Manufacturer: Laird Technologies

Specifications of A12620-15

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

STanDarD ThicKnESSES
0.020" (0.51mm)
0.060" (1.52mm)
0.100" (2.54mm)
0.140" (3.56mm)
0.180" (4.57mm)
Consult the factory for alternate thicknesses
STanDarD ShEET SiZES
9" x 9" (229mm x 229mm)
18” x 18” (457mm x 457mm). 9” x 9” only over 0.100” thickness.
Tflex
applicable for Tflex
Construction &
Composition
Color
Thickness
Thickness Tolerance
Density
Hardness
Tensile Strength
% Elongation
Outgassing TML (Post Cured)
Outgassing CVCM (Post Cured)
UL Flammability Rating
Temperature Range
Thermal Conductivity
Thermal
Impedance
@ 10 psi
@ 69KPa
Thermal Expansion
Breakdown Voltage
Volume Resistivity
Dielectric Constant @ 1MHz
Innovative Technology
TM
600 can be die cut to individual shapes. Pressure sensitive adhesive is not
for a Connected World
TM
600 products.
0.030" (0.76mm)
0.070" (1.78mm)
0.110" (2.79mm)
0.150" (3.81mm)
0.190" (4.83mm)
0.020" (0.51mm)
2 x 10
-45°C to 200°C
2.97 °C-cm
3,000 Volts AC
0.46 °C-in
boron nitride
filled silicone
40 Shore 00
600 ppm/°C
Tflex™ 620
(± 0.08mm)
Blue-Violet
Reinforced
elastomer
± 0.003"
1.38 g/cc
UL 94 V0
3 W/mK
0.13%
0.05%
0.040" (1.02mm)
0.080" (2.03mm)
0.120" (3.05mm)
0.160" (4.06mm)
0.200" (5.08mm)
3.31
N/A
N/A
13
ohm-cm
2
2
/W
/W
0.040" (1.02mm)
>5,000 Volts AC
2 x 10
-45°C to 200°C
4.00 °C-cm
0.62 °C-in
Boron nitride
filled silicone
(± 0.10mm)
25 Shore 00
430 ppm/°C
Tflex™ 640
Blue-Violet
elastomer
± 0.004"
1.34 g/cc
UL 94 V0
3 W/mK
0.050" (1.27mm)
0.090" (2.29mm)
0.130" (3.30mm)
0.170" (4.32mm)
0.13%
0.05%
15 psi
3.31
13
75
THR-DS-Tflex-600 0510
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. Responsibility for the use and application of Laird Technologies
materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness,
merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or conse-
quential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy
of which will be furnished upon request. © Copyright 2010 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other
marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third
parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. A13512-00 Rev. J EO #9655, 05/2010.
ohm-cm
2
2
/W
/W
0.060" (1.52mm)
>5,000 Volts AC
2 x 10
-45°C to 200°C
5.50 °C-cm
0.85 °C-in
Boron nitride
filled silicone
430 ppm/°C
Tflex™ 660
(± 0.15mm)
25 Shore 00
Blue-Violet
elastomer
± 0.006"
1.34 g/cc
UL 94 V0
3 W/mK
0.13%
0.05%
15 psi
3.31
13
75
ohm-cm
TacKy onE SiDE only
Tflex™ 600 is naturally tacky on both sides. Tflex™ 600 can be provided tacky on
one side only. This is indicated by the suffix “DC1”.
This option offers good separation properties allowing the tacky side to stick to the
heatsink/chasis/cold plate/etc. and the other “dry” side to release easily from the
component(s).
rEinforcEMEnT
Fiberglass is required in 0.020” (0.51mm) and 0.030” (0.76mm). Thicknesses of
0.040” (1.02mm) and above do not require reinforcement.
Data for design engineer guidance only. Observed performance varies in
application. Engineers are reminded to test the material in application.
2
2
/W
/W
0.080" (2.03mm)
>5,000 Volts AC
2 x 10
-45°C to 200°C
7.04 °C-cm
1.09 °C-in
Boron nitride
filled silicone
25 Shore 00
430 ppm/°C
Tflex™ 680
(± 0.20mm)
Blue-Violet
elastomer
± 0.008"
1.34 g/cc
UL 94 V0
3 W/mK
0.13%
0.05%
15 psi
Tflex
3.31
13
75
ohm-cm
2
2
/W
/W
Thermal Gap Filler
0.100"(2.54mm)
TM
>5,000 Volts AC
2 x 10
-45°C to 200°C
7.94 °C-cm
1.23 °C-in
Boron nitride
Tflex™ 6100
filled silicone
25 Shore 00
430 ppm/°C
(± 0.25mm)
elastomer
Blue-Violet
± 0.010"
1.34 g/cc
UL 94 V0
3 W/mK
0.13%
0.05%
15 psi
3.31
600 Series
13
75
ohm-cm
2
2
/W
/W
Helium Pycnometer
TEST METHOD
ASTM D5470
ASTM D2240
ASTM D5470
ASTM D150
ASTM D412
ASTM D412
IPC-TM-650
ASTM D149
ASTM D257
ASTM E595
ASTM E595
(modified)
(modified)
E180840
2.4.24
Visual