PTCCL05H150HBE Vishay, PTCCL05H150HBE Datasheet
![no-image](/images/manufacturer_photos/0/6/697/vishay_sml.jpg)
PTCCL05H150HBE
Manufacturer Part Number
PTCCL05H150HBE
Description
PTC CP LDD 5D00 A015 265 140 B E3
Manufacturer
Vishay
Document Number: 29087
Revision: 18-Aug-09
QUICK REFERENCE DATA
PARAMETER
Holding current
Resistance at 25 °C (R
I
Switch temperature
Maximum voltage (RMS or DC)
Operating temperature range
at max. voltage
Climatic category
max.
25
)
0.011 to 0.8
2.1 to 3000
25/125/56
0.8 to 5.5
For Overload Protection
VALUE
0 to 70
For technical questions, contact:
265 V PTC Thermistors
140
265
UNIT
°C
°C
Ω
A
A
V
FEATURES
• Wide range of trip and non-trip currents:
• Small ratio between trip and non-trip currents
• High maximum inrush current (up to 5.5 A)
• Leaded parts withstand mechanical stresses
• UL file E148885 according to XGPU standard UL1434
• UL approved PTCs are guaranteed to withstand severe
• Compliant to RoHS directive 2002/95/EC and in
APPLICATIONS
Over-temperature/over-load protection:
• Telecommunications
• Automotive systems
• Industrial electronics
• Consumer electronics
• Electronic data processing
DESCRIPTION
These
temperature coefficient and are primarily intended for
overload protection. They consist of a metallized ceramic
disk with two tinned brass or copper clad steel leads reflow
soldered to it and coated with a high temperature silicone
lacquer. Leadless disks and leaded disks without coating are
available on request.
MOUNTING
The PTC Thermistors are suitable for processing on
automatic insertion equipment.
Typical soldering
235 °C; duration: 5 s (Pb-bearing)
245 °C, duration: 5 s (Lead (Pb)-free)
Resistance to soldering heat
260 °C, duration: 10 s max.
MARKING
Only the grey lacquered thermistors with a diameter of
8.5 mm to 20.5 mm are marked with BC, R
1R9) on one side and I
From 11 mA up to 800 mA
(I
and vibration
test programs
• Long-life cycle tests (over 5000 trip cycles)
• Long-life storage tests (3000 h at 250 °C)
• Electrical cycle tests at low ambient temperatures
• Damp-heat and water immersion tests
• Overvoltage tests at up to 200 % of rated voltage
accordance to WEEE 2002/96/EC
t
2381 66. 5...3/PTCCL..H...HBE
/I
nlr@vishay.com
(- 40 °C or 0 °C)
nt
= 1.5 at 25 °C)
directly
heated
nt
Vishay BCcomponents
, V
max.
thermistors
on the other side.
have
25
value (example
www.vishay.com
a
positive
25