MURS140T3G ON Semiconductor, MURS140T3G Datasheet - Page 5

• Manufacturer Part Number: MURS140T3G
• Description: DIODE ULTRA FAST 1A 400V SMB
• Manufacturer: ON Semiconductor

Specifications of MURS140T3G

• Voltage - Forward (vf) (max) @ If: 1.25V @ 1A
• Voltage - Dc Reverse (vr) (max): 400V
• Current - Average Rectified (io): 2A
• Current - Reverse Leakage @ Vr: 5µA @ 400V
• Diode Type: Standard
• Speed: Fast Recovery =< 500ns, > 200mA (Io)
• Reverse Recovery Time (trr): 75ns
• Mounting Type: Surface Mount
• Package / Case: DO-214AA, SMB
• Product: Ultra Fast Recovery Rectifier
• Configuration: Single
• Reverse Voltage: 400 V
• Forward Voltage Drop: 1.25 V at 1 A
• Recovery Time: 75 ns
• Forward Continuous Current: 2 A
• Max Surge Current: 35 A
• Reverse Current Ir: 5 uA
• Mounting Style: SMD/SMT
• Maximum Operating Temperature: + 175 C
• Minimum Operating Temperature: - 65 C
• Rectifier Type: Switching Diode
• Peak Rep Rev Volt: 400V
• Avg. Forward Curr (max): 2A
• Rev Curr: 5uA
• Peak Non-repetitive Surge Current (max): 35A
• Forward Voltage: 1.25V
• Operating Temp Range: -65C to 175C
• Package Type: SMB
• Rev Recov Time: 75ns
• Operating Temperature Classification: Military
• Mounting: Surface Mount
• Pin Count: 2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Capacitance @ Vr, F: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: MURS140T3GOS; MURS140T3GOS; MURS140T3GOSTR

PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [e-mail]
ON Semiconductor and
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
L
H
POLARITY INDICATOR
OPTIONAL AS NEEDED
E
E
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
L1
b
c
2.743
0.108
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
D
A1
2.159
0.085
N. American Technical Support: 800−282−9855 Toll Free
Europe, Middle East and Africa Technical Support:
Japan Customer Focus Center
PACKAGE DIMENSIONS
SOLDERING FOOTPRINT*
USA/Canada
Phone: [phone]
Phone: 81−3−5773−3850
http://onsemi.com
CASE 403A−03
ISSUE G
2.261
0.089
SMB
5
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P.
SCALE 8:1
DIM
H
A1
L1
A
D
D
E
b
c
L
E
MIN
1.90
0.05
1.96
0.15
3.30
4.06
5.21
0.76
MILLIMETERS
inches
mm
0.51 REF
NOM
2.13
0.10
2.03
0.23
3.56
4.32
5.44
1.02
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MAX
2.45
0.20
2.20
0.31
3.95
4.60
5.60
1.60
0.075
0.002
0.077
0.006
0.130
0.160
0.205
0.030
MIN
MURS120T3/D
0.020 REF
INCHES
NOM
0.084
0.004
0.080
0.009
0.140
0.170
0.214
0.040
0.096
0.008
0.087
0.012
0.156
0.181
0.220
0.063
MAX