H5CX-L8D-N DC12-24/AC24 Omron, H5CX-L8D-N DC12-24/AC24 Datasheet - Page 26

• Manufacturer Part Number: H5CX-L8D-N DC12-24/AC24
• Description: 8-PIN, RLY OUT, Limit, Instant DC12-24/AC24
• Manufacturer: Omron
• Series: H5CXr

Specifications of H5CX-L8D-N DC12-24/AC24

• Relay Type: Integrated
• Function: Programmable (Multi-Function)
• Circuit: SPDT (1 Form C)
• Delay Time: 0.001 Sec ~ 9999 Hrs
• Output Type: Mechanical Relay
• Contact Rating @ Voltage: 5A @ 250VAC
• Voltage - Supply: 12 ~ 24VDC, 24VAC
• Mounting Type: Socket
• Termination Style: 8 Pin Socketable
• Timing Adjustment Method: Up/Down Digit Keys
• Timing Initiate Method: Input Voltage, Trigger Signal
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: H5CXL8DNDC1224AC24; Z3000

■ Operating Procedures (Twin Timer Function)
Switching from Timer to Twin Timer
The H5CX is factory-set for timer operation. To switch to twin timer operation, use the procedure given below. For details, refer to page 32.
Settings for Basic Functions
Note: All the pins are factory-set to OFF.
Note 1. Be sure to set pin 1 of the DIP switch to ON. If it is set to OFF, the DIP switch settings will not be enabled.
Timer/
twin timer
selection
1
2
3
4
5
6
7
8
Easy Confirmation of Switch Settings Using Indicators
The ON/OFF status of the DIP switch pins can be confirmed
using the front display. For details, refer to page 31.
Switch from timer operation (
twin timer (
Settings for basic functions can be performed with just the DIP switch.
After making DIP switch settings for basic functions, detailed settings (see note) can be added using the operation keys.
For details, refer to page 27.
Note: NPN/PNP input mode, display color, key protect level.
Detailed Settings
Timer/twin timer selection mode
2. Changes to DIP switch settings are enabled when the power is turned ON. (Perform DIP switch settings while the power is OFF.)
3. There is no DIP switch on the H5CX-L8@. For details on the setting methods, refer to page 27.
4. When using time ranges that cannot be set with the DIP switch, all of the settings have to be made using the operation keys. For details
on the setting methods, refer to page 27.
keys.
DIP switch set-
tings enable/
disable
OFF time range Refer to the table on the right.
ON time range
ON/OFF start
mode
Timer mode
Input signal
width
Item
) operation using the
Disabled
Refer to the table on the right.
Flicker OFF
start
UP
20 ms
) to
+
OFF
1
Hold down for 1 s
min. (See note.)
OFF
ON
Enabled
Flicker ON start
DOWN
1 ms
1
Be sure to set pin 1 to ON when using the DIP switch.
ON
2
3
Power ON
Run mode
4
5
6
7
Note: The
8
before the
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Pin 2
Pin 4
key must be pressed
1
key.
OFF
OFF
ON
ON
Pin 3
OFF
OFF
ON
ON
Pin 5
0.01 s to 99.99 s
0.1 s to 999.9 s
1 s to 9999 s
0 min 01 s to 99 min 59 s
0.01 s to 99.99 s
0.1 s to 999.9 s
1 s to 9999 s
0 min 01 s to 99 min 59 s
OFF time range
ON time range
H5CX-A/-L
26