19635 Desco, 19635 Datasheet - Page 4

• Manufacturer Part Number: 19635
• Description: TESTER MINIMEG 9VDC NIST
• Manufacturer: Desco
• Type: Testerr

Specifications of 19635

• Features: Pocket Size
• Power Supply Type: 9V Battery
• Battery Type: 9
• Includes: Cable for resistance-to-ground measurements
• Resistance Range: 10^10 Ohms
• Standards: ANSI⁄ESD S20.20
• Tester Type: Pocket Megohmmeter
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: Surface Resistance
• Lead Free Status / Rohs Status: RoHS Compliant part

TB-2083 Page 4 of 4
Figure 7. Calibration of the Micro Meg
C. Continue this process with each consecutive
resistor, checking to make sure the appropriate LEDs
are illuminated. If all resistors check properly, the unit’s
calibration is verified.
Adjustment
Unauthorized servicing or modifications to the µMeg
will void the product warranty. Servicing should only
be performed by the factory. See warranty section for
repair charges.
B. Place the 1 x 10E10 ohms resistor across the
middle electrode and the side electrode as illustrated
in Figure 7. Press the test button. The second LED
should light. Be sure not to contact the leads or
the buttons as your body’s resistance will affect the
readings. Then use the 5 x 10E9, the 3rd LED should
light. Continue down the line of resistors to test all the
ranges.
ELECTRODE
DESCO EAST - One Colgate Way, Canton, MA 02021-1407 • [phone] • Fax [phone] • Web Site:
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Fax [phone]
RESISTOR
Limited Warranty
Desco expressly warrants that for a period of one (1)
year from the date of purchase, Desco Micro Megs will
be free of defects in material (parts) and workmanship
(labor). Within the warranty period, a unit will be tested,
repaired or replaced at Desco’s option, free of charge.
Call Customer Service at 909-627-8178 (Chino, CA)
or 781-821-8370 (Canton, MA) for a Return Material
Authorization (RMA) and proper shipping instructions
and address. Any unit under warranty should be shipped
prepaid to the Desco factory. Include a copy of your
original packing slip, invoice, or other proof of date of
purchase. Warranty replacements will take approximately
two weeks.
If your unit is out of warranty call Customer Service at
909-627-8178 (Chino, CA) or 781-821-8370 (Canton, MA)
for a Return Material Authorization (RMA) and proper
shipping instructions and address. Desco will quote
repair charges necessary to bring your unit up to factory
standards.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE
IN LIEU OF ALL OTHER PRODUCT WARRANTIES,
EXPRESSED AND IMPLIED, INCLUDING
MERCHANT-ABILITY AND FITNESS FOR A
PARTICULAR PURPOSE WHICH ARE SPECIFICALLY
DISCLAIMED. The express warranty will not apply to
defects or damage due to accidents, neglect, misuse,
alterations, operator error, or failure to properly maintain,
clean or repair products.
Limit of Liability
In no event will Desco or any seller be responsible
or liable for any injury, loss or damage, direct or
consequential, arising out of the use of or the inability to
use the product. Before using, users shall determine the
suitability of the product for their intended use, and users
assume all risk and liability whatsoever in connection
therewith.
Desco.com
© 2010 DESCO INDUSTRIES INC.
Employee Owned