4077-C 3M, 4077-C Datasheet - Page 3

• Manufacturer Part Number: 4077-C
• Description: PLUGGABLE MODULE SEALANT BOX (FOR TWO SUPER MATES)
• Manufacturer: 3M

Specifications of 4077-C

• Product: Tools & Accessories
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3.06 Snap latches on ends of sealant box to lock
3.07 Remove insertion tool and repeat procedure for
4.0 Module Reentry and Rearrangements
4.01 To remove module from sealant box, release end
Note: Sealant boxes must not be reused.
4.02 Wipe grease from test port side of module.
4.03 Perform necessary rearrangement of modules.
832754
modules into place
remaining modules.
latches and remove nipples (see arrows below)
from base of box with snips or sheath knife.
Remove module.
832757
4.04 To install new sealant box, follow initial
Note: When wire ports have been filled previously
Note: Carefully follow safety, health and
installation procedures with the following
exception:
Twist Sealant Tag and remove from insertion tool.
Before inserting module, use sealant tag to
remove excess grease from the box. Scrape
grease with tag held vertically.
873600
with sealant, it will be necessary to remove
a small amount of grease from the new
sealant box to allow easy module insertion.
Use this procedure when ONE OR MORE of
the modules in the rearrangement has
previously been in a sealant box.
environmental information on the product
label or Material Safety Data Sheet.