Z-15GW2 Omron, Z-15GW2 Datasheet - Page 9

• Manufacturer Part Number: Z-15GW2
• Description: BASIC SWITCH
• Manufacturer: Omron
• Series: Zr

Specifications of Z-15GW2

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 15A @ 125VAC
• Actuator Type: Lever, Roller
• Mounting Type: Chassis Mount
• Termination Style: Solder Lug
• Operating Force: 100gf
• Contact Form: SPDT
• Contact Rating: 15 Amps at 250 Volts
• Actuator: Roller Lever
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Z15GW2

Dimensions
■ General-purpose and Split Contact Models
Note: Unless otherwise specified, all units are in millimeters and a tolerance of ± 0.4 mm applies to all dimensions
Terminals
Mounting
All switches can be side mounted using M4 mounting screws with
plane washers or spring washers to securely mount the Switch.
Tighten the screws to a torque of 1.18 to 1.47 N·m.
Versions with panel mount plungers can be panel mounted via the
plunger, provided that the hexagonal nut of the actuator is tightened
to a torque of 2.94 to 4.9 N·m.
Note: Mount using either the side mounting holes or the panel mount
Note: With reverse action models (Z-15GM), the positions of NO and NC terminals are reversed.
Panel Mount Plunger
Screw Terminals (-B)
Appropriate terminal screw tightening
torque: 0.78 to 1.18 N·m.
9.2
Accessories (Terminal Covers, Actuators, and Separators): Refer to ‘Z/A/X/DZ Common Accessories’ datasheet
plunger, not both. If using the side mounting holes, then remove
the hexagonal nut(s) from the panel mount plunger.
COM
1
20
12.5
49.2
NO
3
+0.2
0
dia.
20
Two, 4.2 dia. mounting holes or M4
NC
2
25.4
± 0.1
Three, M4 × 5.5
Terminal screws
(with toothed
washer)
17.45
General-purpose Models
± 0.2
Panel Mount Roller Plunger
13
Solder Terminal (Blank)
+0.2
0
12.5
6.4
+0.2
5
0
+0.2
0
dia.
25.4
1
2
3
49.2
NO
NC
COM
± 0.1
11.9
17.45
General-purpose Basic Switch
± 0.2
11.9
Screw Terminals (Y-B)
Appropriate terminal screw tightening torque:
0.49 to 0.78 N·m.
Note: With reverse action models (Z-10FM),
5.6
the positions of NO and NC terminals
are reversed.
Split-contact Models
23
17.1
Z
Five, M3.5 × 5.5
terminal screws
(with toothed
washer)
17.45
± 0.2
155